Seat set street Tyga doubleseat, NC30 kit
€748.25
Seat set street Tyga doubleseat, NC30 kit
Practicality
This seat cowling kit retains the stock NC30 sub frame and passenger seat so it is possible to carry a passenger as well as keep the luggage compartment. The kit re-uses the original Honda seat pads, locks and latch mechanism.
This kit is designed to give the NC30 a modern appearance while at the same time being a practical every day bike. The kit is supplied with all the mounting hardware and lighting and is straight forward to install with a stock machine as a starting point. Rear light LED.
The seat cowling keeps the tank in the stock position and the fuel cock is accessible.
Compatibility
This kit can be used with either stock Honda fairings or TYGA ones. If used with hon-10065 (as shown in the photos), some repositioning of the side stays is required because hon-10065 is designed for a slightly raised rear position on the fuel tank. For all other TYGA fairings, no modifications are required and the seat cowling kit can be installed without affecting the fairing.
This product is designed for the NC30. To use it with the NC35 is possible but it will require NC30 seats and some modification of the electrical component positions as well as stays for the front sub frame and tank mounting positions.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0078
SKU: hon-10067 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Triple clamp set CNC black, Honda RVF400 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit NC35
CNC machined TYGA lower triple clamp for the NC35 RVF400 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1742
SKU: hon-10555 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, ShopExhaustset stainless steel maggot silencer, Honda CBR300
€393.26
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-3013. If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing approx 2.5 kg instead of the stock systems 8kg.
This system may not comply to specific country noise emission regulations and is not homologated for street use. Actually it is extremely loud so be warned!
TYGA no: EXPS-0054Â
SKU: hon-10370 Categories: 4 stroke exhaust sets, ALL products, CBR300R 2014-, Exhausts, Honda, ShopVHM Cyl. headset Yamaha YZ125 ’05-
€271.95 €256.04
VHM Cyl. headset Yamaha YZ125 ’05-> (alg-10202) AA33077VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (11.00cc)Optional inserts:– blind– 10.80– 11.00– 11.20This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33077Â Â Â Â Â Â Â Â
SKU: alg-10202 Categories: ALL products, Motocross, Shop, VHM products, Yamaha, Yamaha MXRr. Brake master, Rebuild Kit, MC18~28
€70.60
Rr. Brake master, Rebuild Kit, MC18~28
TYGA no: 43520-MB2-315
SKU: hon-11086 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28Silencer left shorty, stainless 70mm
€89.99
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
TYGA no: EXSL-0106L
SKU: yam-10086 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Shop, TZR250 3MA, YamahaFlange, Silencer mounting (mild steel) 2 stroke
€9.71
This Silencer Mounting Flange, made in mild steel, allows for fitment of all TYGA silencers to just about any two stroke expansion chamber. Simply cut off the original mount flange and weld on the TYGA mount flange.
26.5mm inside diameter. Some expansion chamber systems may require a reducing sleeve, or modification to the mount flange for the perfect fit.
This is a replacement part. When ordering chambers (EXCS-****), this item is included in the price and you do not need to order this parts separately.
TYGA no: TPER-0022
SKU: alg-10002 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, ShopLower Cowling (GRP), NSR250, MC21/MC28 Stock Shape, Painted Rothmans
€595.33
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFL-9001Painted
SKU: hon-10973 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, NSR250 MC28, Shop, Silencers