Front fender “stock type” , Honda VFR750 RC30
€111.13
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Carbon front fender, Honda CBR1000 2008-13
€217.69
Lightweight carbon fibre direct replacement for Honda OEM item. Predrilled for use with stock mounting hardware.
(TYGA logo is applied after clearcoat and can be eaily removed)
Update your bike with this great carbon product, direct replacement of the original part
TYGA no: BPCF-7101
SKU: hon-10060 Categories: ALL products, Carbon, CBR1000 2008-11, CBR1000 2012-, Honda, ShopKit, Seat Set, GRP, (Street), MC21, MC28, NSR250V
€442.35
Kit, Seat Set, GRP, (Street), MC21, MC28, NSR250V
Modelled closely from the seat cowling taken off an actual NSR500V HRC factory machine, this seat cowling kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but in proportion to the NSR250. This seat cowling set can be installed with both the MC28 and the MC21, (though to fit it on a MC21 you will need an MC28 fuel tank or TYGA Fuel tank BPCG-0001 or BPFG-0001). The set consists of the parts shown below and has a taillight for street use and special mounting hardware and seat pad provided.
We have designed the seat cowling so that for fuel tank removal, there is no need to remove the seat cowling, making for quick and easy jet changes and maintenance etc. Note, you do not need to change the subframe for either the MC21 or MC28 models to install this seat cowling which bolts to the stock subframe holes at the rear and special front lower subframe mounting positions with all hardware provided. The seat cowling has threaded holes in the underside to attach exhaust stays TYLY-0243L and TYLY-0243R for use with NSR250V exhaust system EXCS-0047
We recommend installing this seat cowling set with fairing set BPFS-0195 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0196
SKU: hon-11059 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Upper cowling race, Aprilia RS250 Tyga, assy
€243.41
This upper cowling is to be used in our Aprilia RS-250 kit, BPFS-0101.
This product is compatible with lower cowling BPFL-9030. Will not fit stock Aprilia lower cowling
TYGA no: BPFU-9130
SKU: apr-10047 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, ShopExhaust Hanger Stay, Pair, Carbon, RGV250, VJ23
€108.42
Rear Hugger/Chain Guard (Carbon), VJ23 RGV250
The VJ23 RGV250 is the only RGV250 model which does not have a rear hugger as standard and as a result, all the road filth and rain tends to collect around the rear shock and under side of the seat cowling. TYGA Performance have developed this carbon hugger as a solution to the dirt issue while making the swing arm/rear wheel part of the bike more attractive. Designed to fit onto the contour of the VJ23 swing arm’s fabrication and lock into position by a rub underneath, the TYGA hugger incorporates the rear chain guard too, using the chain guard’s mounting holes on the left to hold it securely in place. On the right side, it is held on by a cable tie through the rear brake line guide and at the front by an M4 bolt which is requires drilling and tapping of the swing arm by the customer to install this product.
IMPORTANT, note that due to the VJ23 never having the option for a rear hugger, there is no position provided on the swing arm to mount the hugger at the front and it is necessary to drill and tap an M4 hole in the swing arm and use a cable tie to provide a good level of support for the hugger. See photos 7 and 8 for details on what is required to install this product.
Complete with all fitting hardware.
Tyga Step Kit Replacement Right Side Hanger, MC28, Assy.
€58.39
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts and bushes.
TYGA no: STAH-0002B
SKU: hon-10800 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28NGK sparkplug R7282-10, short
€58.94
NGK sparkplug R7282-10, “short” (alg-10227)
The short version of the R7376 plugs if clearance is a problem. NOTE: NGK TRS1225 cap required.
Extreme Long Life Laser Iridium Plug, 14mm Thread, 19mm (3/4″) Reach, 13/16″ (20.6mm) Hex Size, Gasket Seat, Resistor, Solid Terminal, Iridium Tipped Fine Wire Center Electrode and Platinum Tipped Ground Electrode, .020″ (0.508mm) Gap.
NGK’s Standard Plugs are Constructed for Longer Life and Optimum Performance.
TYGA no: R7282-10
SKU: alg-10227 Categories: ALL products, Aprilia, High performance, High performance, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various partsVHM cylinder head (2 pieces), Yamaha TZ250 ’03
€534.90 €493.12
VHM cylinder head (2 pieces), Yamaha TZ250 >’03 (alg-10172)VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:2x cylinder head2x standard insert (12.0cc)This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl nog 1