Fairing set race stock shape, Honda NSR250 MC21
€674.07
This kit comprises of parts below.
Upper Fairing
Lower Fairing
Seat Fairing
Front Fender
Screen
The fairing is a race version of the stock shape with headlight and indicator holes filled in. The lower is in one piece for simple installation and removal.
Ideal for race classes where retaining stock shape (or similar) is necessary to comply with rules. The panels are top quality, being lightweight, flexible and tough. Constructed with epoxy resin and multi layer cross weave mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
This kit is supplied with clear screen. Please state if you would like a tinted screen or and we will be happy to change to suit. Same applies if you wish to substitute a different model front fender.
Please note that the fairings only weigh approx. 1kg for upper fairing panel and 1.5 for lower and 1.6 kg for seat cowling. To ensure a safe delivery, the box they are sent in weighs 4 kg. You may want to consider two sets and save on shipping…
Delivered in white primer
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFS-0112
SKU: hon-10356 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, ShopDash Indicator Bulb Harness, MC21
€17.20
This product plugs in line with the wiring connector that connects to the main harness from the left hand handlebar switch and allows the turn signal instrument warning light to function properly when LED turn signals and turn signal relay TELC-0002 are installed. Without this harness, the LED turn signals and turn signal instrument warning light will not flash properly. To install simply unplug the connector at the front of the bike near the master stay and install the TYGA mini harness in line.
This will fit the Honda NSR250 MC21 but also may fit other Honda models.
TYGA no: TYWH-0003
SKU: hon-10747 Categories: ALL products, Honda, NSR250, NSR250 MC21, Various partsCowling, Side, RH, Green, Ninja 250R 2008 -12
€259.23
Cowling, Side, RH, Green, Ninja 250R 2008 -12
TYGA no: 55028-0272-777
SKU: kaw-10197 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopFork cap kit, Honda RVF750R RC45
€317.71
After 20 years or so of use, many RC45’s have damaged or scruffy fork caps. We know that it can really detract from an otherwise well restored bike if the fork caps are scuffed or dinged up. We therefore decided to reproduce the fork caps both for our collection and to offer to the public at the same time. CNC machined from 7075 T6 aluminium and brass and with the clear anodizing, just like the original OEM parts, these fork caps are the finishing touch of any R45 restoration and install exactly the same as the original Honda ones.
The 3 legged Spring Adjuster Plate is not included in this kit. Please reuse the original part.
Removal and refitting of the original RC45 rebound damper rod is required, so please follow the instructions carefully.
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
€885.87
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: BPFS-0188
SKU: hon-10980 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopExhaust set slip on, Motogp style stainless steel maggot , Honda MSX125 GROM
€307.40
Set, Pipe, Slip On, MSX125 Grom, Moto Maggot Silencer
Made in stainless steel with spring mounted aluminium silencer, this system significantly increases performance, saves weight and gives the best bang for the buck! (May not comply with noise regulations for some states and territories)
This system is supplied with a Moto Maggot EXSL-8013
Compatibility:
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0034
SKU: MSX-10004 Categories: ALL products, Exhausts, Exhausts, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, ShopCarbon heel guard right,
€32.04
Replacement left heel guard for Tyga step kits, see model below. TYGA design, but will also fit standard Aprilia RS-250 hanger.
STAA-0006
STAA-0024
STAA-0124
TYGA no: BPCC-9008
SKU: apr-10028 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, CNC parts, CNC parts, KTM, RC 125/200, RC 390, RS250, Shop, Various partsSet tube, ram air connectors, Honda RS250 NX5
€51.55
Set Tube, Ram Air Connector, RS250 NX5 (pair)
Direct replacement parts for OEM HRC part: 17520-NX5-770
3D Printed in flexible TPU. These tubes are a simple replacement for the no longer available rubber tubes from HRC.
TYGA no: TPER-0036
SKU: hon-10916 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various parts