Seal, RC Valve Shaft, MC28
€4.96
Seal, RC Valve Shaft, MC28
TYGA no: 91201-PA9-004
SKU: hon-11116 Categories: ALL products, High performance, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Carbon exhauststay left, Suzuki RGV 250
€29.88
Carbon Exhaust hanger stay for RGV250. This product is used to secure the left side silencer for systems with a side by side silencer. It can be used with or without the passenger footpeg assembly so it is suitable for both street and race bikes
Compatible with the following TYGA exhaust systems:
EXCS-0009
EXCS-0014
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCC-0012L
SKU: suz-10004 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, SuzukiStay, taillight, Honda VFR400 NC30
€8.94
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPSY-0326
SKU: hon-11414-1 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, Various parts, VFR400RR NC30Stay upper, ram air, NX5
€24.41
Throttle Housing. NSR250, HRC, Assy
This throttle is a reproduction of a factory HRC one used on the factory NSR250s in the 1990s and similar. For one of our projects, a customer kindly sent us the scan of the HRC part and from that we were able to reproduce this almost impossible to find part. The actual housing is CNC machined in 6061 T6 aluminium. The machining marks are then removed by bead blasting and then the part sprayed black to faithfully reproduce the look of the original factory cast one. The actual throttle is 3D printed in tough Nylon. The throttle uses an M6 type cable adjuster screw to secure to the cable and about 45 degrees of rotation of the throttle, for 32mm movement on the throttle cable.
Note, this is not plug and play for any motorcycle that is available from Honda or even HRC for that matter. It was designed for unobtainable factory NSR250 motorcycles and the like and will NOT fit your MC21, MC28 etc. However, it is an interesting and useful product for anyone wanting a special looking throttle and willing to adapt it to their project. We wanted this for our NX5 factory racer project which is still in development and we plan to hook it up to Keihin SPJ carburetors. If anyone else wants to do a similar project then hopefully, this will useful to them.
TYGA no: TYLY-0227
SKU: hon-10988 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various partsFairing stay front, GP-T. Honda NSR250 MC21/MC28
€19.98
Fairing Stay, Front, NSR250, GP-T, Assy.
This stay mounts to the stock Honda meter stay or TYGA meter stays TYLY-0004 and TYLY-0005 and allows for fitment of the upper fairing BPCU-9033 and BPFU-9033. Supplied complete with plastic bung for quick fairing assembly and removal.
Compatible Parts
TYGA upper cowlings, BPFU-9033 and BPCU-9033.
TYGA no: BPSY-0155
SKU: hon-10536 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopSteering stopper MiniRacerXtreme, Honda MSX125 GROM
€17.45
Steering Stopper, MSX125 Grom
This steering stopper is designed specifically for our MRX project to limit steering movement to the confines of the body kit. However, this can be used separately with the standard set up for anyone wanting to limit steering movement. Easy to install and fits in minutes.
Fitting Instructions:
Remove the front brake stay and the horn wiring stay from the lower triple clamp temporarily. Install the steering stopper as shown in the photo Reinstall the stays in the standard position holding the steering stopper in place. Test to make sure the steering operates smoothly and no wires, cables or hoses are getting pinched or rubbing on anything they shouldn’t do.
TYGA no: BPSY-0122
SKU: MSX-10270 Categories: ALL products, By model, Honda, MRX, MRX, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, ShopKit, Seat Set, GRP, (Street), MC21, MC28, NSR250V
€442.35
Kit, Seat Set, GRP, (Street), MC21, MC28, NSR250V
Modelled closely from the seat cowling taken off an actual NSR500V HRC factory machine, this seat cowling kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but in proportion to the NSR250. This seat cowling set can be installed with both the MC28 and the MC21, (though to fit it on a MC21 you will need an MC28 fuel tank or TYGA Fuel tank BPCG-0001 or BPFG-0001). The set consists of the parts shown below and has a taillight for street use and special mounting hardware and seat pad provided.
We have designed the seat cowling so that for fuel tank removal, there is no need to remove the seat cowling, making for quick and easy jet changes and maintenance etc. Note, you do not need to change the subframe for either the MC21 or MC28 models to install this seat cowling which bolts to the stock subframe holes at the rear and special front lower subframe mounting positions with all hardware provided. The seat cowling has threaded holes in the underside to attach exhaust stays TYLY-0243L and TYLY-0243R for use with NSR250V exhaust system EXCS-0047
We recommend installing this seat cowling set with fairing set BPFS-0195 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0196
SKU: hon-11059 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Carbon dash standard, Aprilia RS250
€50.22
This carbon dash is the same shape as the stock Aprilia dash used on the later Mark II RS250 (1998-2008) Suitable for stock bodywork only.
It adds bling factor and weighs only 40 grams!
Update your bike with this great carbon product, direct replacement of the original part
Not suitable for TYGA bodywork kits (BPFS-0100 and BPFS-0101). For these kits order BPCX-3230
TYGA no: BPCX-9330
SKU: apr-10058 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, Shop