Carbon tankcover rear RVF, NC35
€395.36
This carbon cover fits over the stock NC35 tank in minutes. Ideal for covering damaged tanks or for completing the ful carbon body work makeover.
TYGA no: BPCX-9201
SKU: hon-10144 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopFront cowling race RCV211, NC30 NC35 NC29
€152.38
This is a replacement part for bodywork set BPFS-0012, BPFS-0014 and BPFS-0020
TYGA no: BPFU-9120F.
SKU: hon-10093 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, CBR400RR NC29, Honda, RVF400RR NC35, Shop, VFR400RR NC30Big bore kit 300cc wiseco, NSR250 MC18/MC21/MC28
€2,264.37
This 300cc Big Bore Kit is identical to the TPER-0007 300cc Big Bore Kit, but the standard 300cc pistons are replaced with high performance options.
In this case we have forged Wiseco pistons that are lighter and stronger than stock. They use Wiseco rings, clips and pins.
See below for performance details for TPER-0007.
Bore & Stroke is 59mm x 54.5mm giving a total displacement of 298cc.
Parts included in the NSR300 kit.
Cylinder x 2 (includes head studs, RC valve, pulley & nut and washers)
Rear Head x 1
Front Head x 1
Piston x 2
Ring set x 2
Piston Pin x 2
Piston Clip x 4
S/E Bearing x 2
Head gasket x 2
Cylinder gasket x 2
RC Valve cables x 4
Water hose x 1
Exhaust Manifold x 2 (to fit TYGA pipes)
Other information:
There is no problem about the RC valves hitting the piston due to thin cylinder wall thickness. This is not an issue on our kit as it’s using different
cylinders, not modified NSR250. They are genuine OEM Honda cylinders, made and plated in Japan to their typical high quality.
The RC valves are easier to adjust than ever on the 300 kit, as there’s only one adjuster screw to play with, and each cylinder marked at the correct ‘fully open’ position for simple setting.
Exact Jetting requirements for your area and application cannot be provided due to differing atmospheric conditions around the world. However, following are some base settings to work from:
MC21 Std bottom end, Wire splice, TYGA Pipes, Airbox lid mod with filter.
Temp: 29 C
Press: 1015mb
Hum: 65%
Alt: 30m
MJ – #182/#185
JN – Std./Std.
SJ – #38/#38
AS – 1.5 turns out
PwrJ – Std./Std.
Tip: Cooler temps, higher pressure and/or lower humidity require richer jetting. High altitude requires leaner settings. Starting off with rich settings will in the worse case foul a plug. Too lean a setting may destroy the engine.
This jet set-up is for guidance only. TYGA Performance cannot be held responsible for any engine damage incurred due to incorrect settings.
At present, this kit is available by special order. Each kit takes approx. four weeks to prepare.
TYGA no: TPER-3007Â
SKU: hon-10390 Categories: ALL products, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopUpper cowling street with air duct, Aprilia RS250 Tyga, assy
€243.41
This upper cowling is to be used in our Aprilia RS-250 kit, BPFS-0100.
This product is compatible with lower cowling BPFL-9030. Will not fit stock Aprilia lower cowling
TYGA no: BPFU-9030
SKU: apr-10045 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, ShopSide cowling B left (GRP), KTM RC125/RC200/RC390
€150.56
Side Cowling B, Left, Race (GRP), KTM RC125/200/390
This lightweight GRP side cowling replaces the heavier stock plastic item. Ideal for racing.
Must be used with:
BPFX-7231L TYGA Performance Side Cowling A, Left, Race (GRP), KTM RC125/200/390.
BPCX-7231L TYGA Performance Side Cowling A, Left, Race (Carbon), KTM RC125/200/390.
Our fairing has the same shape as the original KTM side cowlings, but we have made some updates on the product which makes it stronger and easier to instal.
The TYGA side cowling work together as a set, the original KTM fairing won’t fit the TYGA and vice versa.
When you want to order make sure you order A B.
TYGA no: BPFX-7331L
SKU: ktm-10048 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, ShopCarbon seat cowling passenger, KTM RC125/RC200/RC390
€300.99
Seat Cowling, Passenger, (Carbon), KTM RC Series
This lightweight seat cowling is the same shape as the stock foam passenger seat but being made of carbon is much lighter. As well as the weight saving, it adds style and individualism to your ride and can be installed in minutes.
This product is supplied with all mounting hardware.
Let your KTM RC stand out from the crowd this beautiful carbon product.
TYGA no: BPCT-7231
SKU: ktm-10066 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, KTM, RC 125/200, RC 390, ShopUpper cowling set GRP endurance , Honda VFR400 NC30
€434.45
Upper Cowling Set, Endurance, (GRP) NC30
This Suzuka 8 Hour inspired cowling is supplied with four headlight covers, two unpainted ones and two in clear (yellow can be supplied instead of clear, see available options on the bottom of the page) The fairing uses the stock NC30 headlight and mounts to the bike using the mounting hardware provided (Upper stay and front mounting bolt and spacer bush. All the other parts mount the same way as stock including meter stay, mirrors, indicators etc. We recommend that this be used with the TYGA lower cowling BPFL-0003, or it can be used with stock Honda NC30 lower and inner cowling too.
The windscreen is not included. Please order one of the following windscreens:
SCRE-0041
SCRE-0042
SCRE-0043
SCRE-0105
SCRE-0125
SCRE-0132
TYGA no: BPFS-0152
SKU: hon-10639 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30Flange, Silencer mounting (stainless steel) 2 stroke
€12.10
This Silencer Mounting Flange allows for fitment of all TYGA silencers to any stainless steel two stroke expansion chamber. Simply cut off the original mount flange and weld on the TYGA mount flange.
26.5mm inside diameter. Some expansion chamber systems may require a reducing sleeve, or modfication to the mount flange for the perfect fit.
TYGA no: TPER-0052
SKU: alg-10086 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Honda, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, Shop