Silencer oval carbon, Honda MSX125 GROM
€329.98
Silencer, Carbon, Oval/Carbon End Cap, Spring Mount, MSX125 Grom, No Fittings
TYGA no: EXSL-0042p
SKU: MSX-10066 Categories: ALL products, Exhausts, Exhausts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopSilencer stainless round, WSS300 (street) system, KTM RC390
€406.03
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0074
SKU: ktm-10149 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsTriple clamp set CNC black, Honda NSR250 MC18/MC21
€673.57
CNC machined TYGA triple clamp set for your NSR250 MC21.
These stylish, all aluminium triple clamps are a direct replacement for the MC21 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1241Â
SKU: hon-10265 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, ShopSet pipe “slip on’ Mesh slash cut” stainless, KTM Duke 390
€168.73
Set, Pipe, Slip On, Mesh, Slash Cut, KTM 390 Duke
Hand welded from stainless steel, this is a direct bolt on to the standard 390 Duke . Just remove the stock silencer and fit the TYGA silencer.
This silencer looks great, significantly reduces weight without being too loud due the cat box reducing noise significantly before it reaches the tail pipe. Nevertheless, this product may not comply with noise regulations for some states and territories).
Stay standard, side cowl Left, Honda VFR400 NC30
€14.08
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPSY-0325L
SKU: hon-11414 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, Various parts, VFR400RR NC30Bikini fairing (GRP) Honda MSX125 GROM
€87.04
Bikini Fairing (GRP), MSX125 Grom, Unpainted
This bikini fairing is uniquely designed to blend with the stock bike’s styling and neatly integrate the headlight unit with the instrument cluster. Available in GRP and finished in primer ready for paint shown here and also in carbon (see BPCU-7128). This unit can be installed on completely stock bike or with other TYGA products as shown in the photo.
Now also available in OE Honda colours to match your bike. See product list for details.
TYGA no: BPFU-7128
SKU: MSX-10184 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopCarbon front fender, Honda CBR1000 2008-13
€217.69
Lightweight carbon fibre direct replacement for Honda OEM item. Predrilled for use with stock mounting hardware.
(TYGA logo is applied after clearcoat and can be eaily removed)
Update your bike with this great carbon product, direct replacement of the original part
TYGA no: BPCF-7101
SKU: hon-10060 Categories: ALL products, Carbon, CBR1000 2008-11, CBR1000 2012-, Honda, ShopFront Fork Preload Adjusters blue/red (Pair), Honda MSX125 GROM
€172.49
Front Fork Preload Adjusters, Pair, MSX125 Grom, Red/Blue
These fully functional preload adjusters replace the blank end caps on the stock MSX125 Grom front suspension. It is generally acknowledged that the MSX125 is a bit soft on the front and these caps allow the rider to increase (or reduce) the amount of preload on the internal springs, which in turn, effectively increases or reduces the stiffness of the front forks allowing for a better set up for your riding style or conditions.
These adjusters allow you and extra 6mm of preload from standard.
Supplied in red and blue anodised finish, (see TYLY-1097 and TYLY-2097 for other colour versions too) these adjusters are as beautiful as they are functional.
TYGA no: TYLY-0097
SKU: MSX-10137 Categories: ALL products, Honda, MSX125 2013 - 2015, Shop, Various parts