Carbon Frame Cover (pair) Kawasaki ZX10R 2016-2018
€484.55
Frame Cover, Pair, (Carbon) Kawasaki ZX10R 2016-2018
These lightweight carbon covers fit over the frame and they are designed to
protect against scratches and damage to the frame in the event of an
accident
(TYGA logo is applied after clearcoat and can be eaily removed)
Section, Pipe, Underbelly, Full Race System, MSX125 Grom
€150.88
Section, Pipe, Underbelly, Full Race System, MSX125 Grom
Suitable for our exhaust systems EXPS-0064 and EXPS-0068
Carbon tank shields (pair), Yamaha R1 2007-8
€205.59
This product replaces the cheap looking plastic panels which fit between the frame and the tank on the R1. This product comprises one left and one right panel which can be fitted in minutes.Front part held in place by Velcro provided.
TYGA no: BPCC-7102
SKU: yam-10013 Categories: ALL products, Carbon, Shop, Yamaha, YZF-1000 R1 2007- 8Subframe aluminium , Honda RVF400 NC35
€493.97 €444.57
This lightweight aluminium subframe is closely modelled on the stock NC35 subframe and can be substituted for the heavy steel one with a weight saving of XXX. Made from extruded and CNC machined 6000 series aluminium, this product is hand-welded by our craftsmen to provide a strong, accurate and beautiful component. Finished in Hard wearing satin black powdercoating, it can be painted if the customer so chooses.
Note this subframe is for race and single seat use only and cannot be used for carrying a passenger. All mounting positions for exhaust stay, seat cowling, seat pad, undertray, radiator overflow bottle, electrical components etc which are normally mounted to the subframe are supplied with subframe, there are even two mounting holes in case you wish to install a remote reservoir rear shock (BPCC-0046 is a direct fit), so it is almost a simple plug and play. Most of the standard fasteners are used, however where necessary, replacements are included.
If you wish to run this subframe without the rear fender, then this is also possible and we recommend installing it along with Seat cowling bracket part number: TYLY-0224-17 and battery box TYLY-0026. In this configuration, you will need modify the rear mounts of the battery box and drill them to attach to the subframe and to cable tie, starter relay etc which are normally attached directly to the undertray
TYGA no: TYLY-0225
SKU: hon-10985 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, Various partsFront fender RVF, NC35
€66.24
Same shape as original
Compatible Parts:
All Tyga Performance and Honda OEM panels.
TYGA no: BPFF-0004
SKU: hon-10125 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopThrottle housing HRC NSR250, NX5 / NXA
€206.99
Throttle Housing. NSR250, HRC, Assy
This throttle is a reproduction of a factory HRC one used on the factory NSR250s in the 1990s and similar. For one of our projects, a customer kindly sent us the scan of the HRC part and from that we were able to reproduce this almost impossible to find part. The actual housing is CNC machined in 6061 T6 aluminium. The machining marks are then removed by bead blasting and then the part sprayed black to faithfully reproduce the look of the original factory cast one. The actual throttle is 3D printed in tough Nylon. The throttle uses an M6 type cable adjuster screw to secure to the cable and about 45 degrees of rotation of the throttle, for 32mm movement on the throttle cable.
Note, this is not plug and play for any motorcycle that is available from Honda or even HRC for that matter. It was designed for unobtainable factory NSR250 motorcycles and the like and will NOT fit your MC21, MC28 etc. However, it is an interesting and useful product for anyone wanting a special looking throttle and willing to adapt it to their project. We wanted this for our NX5 factory racer project which is still in development and we plan to hook it up to Keihin SPJ carburetors. If anyone else wants to do a similar project then hopefully, this will useful to them.
TYGA no: TPER-0077
SKU: hon-11223 Categories: ALL products, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various partsCarbon Inner cowling stock shape, Yamaha TZR250 3MA
€222.31
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
TYGA no: BPCC-7052
SKU: yam-10093 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Shop, TZR250 3MA, YamahaRacing step kit CNC silver, CBR250 2011 – CBR300 2014
€297.47
Racing Step Kit, (Fixed), CBR250R/CBR300R
Designed in-house by TYGA Performance using the latest CAD/CAM software, these CNC machine-made step kits are made from top quality aircraft grade aluminium. Complete with carbon heelguard on left hanger*. Kit is supplied with mounting hardware for stock Honda rear brake light switch.
Race shift possible by either modification to, or removal of the sprocket cover.
This step kit moves the peg position back 35 mm. and up 25 mm. from standard. For four way adjustable step kit, see STAA-0023. Note STAA-0023 is for race use only and requires removal of ABS system.
TYGA no: STAA-0013
SKU: hon-10186 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, Honda, Shop