Triple Clamp Set, CNC Silver race, NSR250 M21/MC28 to fit NX5 forks
€714.33
Triple Clamp Set, CNC Silver, Race, NSR250 MC21/28 To Fit NX5 Forks
CNC machined TYGA triple clamp set for the MC21 to take Honda RS250 NX5 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy, and anodized clear. FEA tested and developed for increased strength without unnecessary weight increase.
This triple clamp set is delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
There is no provision for the ignition switch, so an alternative mounting location must be found.
Pitch of forks: 200mm (Same as RS250)
Fork Offset: 35mm (Same as NSR250)
Top Clamp: 50mm Bore
Bottom Clamp: 54mm Bore
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0262
SKU: hon-10914 Categories: ALL products, CNC parts, CNC parts, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Lower cowling (GRP) white, Honda MSX125SF GROM
€332.31
Lower Cowling, (GRP) White MSX125SF, Grom 2nd gen 16-17
Lower Cowling, (GRP), White, MSX125SF. Bling up your GROM with this cool component. High quality mounting hardware provided and easy to install.
This Lower Cowling is also available as BPCL-7428 in Carbon
TYGA no: BPFL-7428W
SKU: msx-10383 Categories: ALL products, Bodywork and carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020, ShopClamp, Manifold, NC30/35
€18.96
Manifold Clamp. Fitted to rear cylinder port. For use with:
EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)
EXPS-0011 Set, Pipe, Full Race System NC30-35 Maggot Silencer
EXPS-0028 Set, Pipe, Full Race System NC30-35, Oval Carbon/Carbon End Cap Silencer
EXPS-0012 Set, Pipe, Full Race System NC30-35, Oval Stainless Silencer
EXPS-0053 Set, Pipe, Full Race System NC30-35, Round Aluminium Silencer
EXPS-0010 Set, Pipe, Full Race System NC30-35, Round Carbon Silencer
EXPS-0026 Set, Pipe, Full Race System NC30-35. Round Carbon/Carbon End Cap Silencer
EXPS-0003 Set, Pipe, Twin Stack System, Carbon Silencers
EXPS-0005 Set, Pipe, Twin Stack System, Stainless Silencers
TYGA no: EXMC-0008a
SKU: hon-10854 Categories: ALL products, Exhausts, Exhausts, Exhausts, Stock list, all modelsLower cowling (GRP) yellow, Honda MSX125SF GROM
€332.31
Lower cowling (GRP) yellow, Honda MSX125SF GROM
Lower Cowling, (GRP), yellow, MSX125SF. Bling up your GROM with this cool component. High quality mounting hardware provided and easy to install.
This Lower Cowling is also available as BPCL-7428 in Carbon
TYGA no: BPFL-7428Y
SKU: msx-10387 Categories: ALL products, Bodywork and carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020, ShopSidehanger left, NC30 NC35 (Tyga)
€54.77
Replacement left hanger for your TYGA Step Kit. Complete with mounting bolts and bushes.
TYGA no: STAH-0003
SKU: hon-10109 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Lower Cowling, (GRP) NX5 RS250R (late model style)
€210.73
Lower Cowling, GRP, NX5 RS250R (Early Model Style)
The lower fairing is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9136
TYGA no: BPFL-9136
SKU: hon-10945 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopTankcover rear RVF, NC35
€147.09
This unpainted cover fits over the stock NC35 tank in minutes. Ideal for covering damaged tanks.
TYGA no: BPFX-9201
SKU: hon-10145 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopUpper Cowling (Race GRP), NC23 Upper Cowling, T9, Assy.
€266.15
Upper Cowling (Race GRP), NC23 Upper Cowling, T9, Assy.
Replacement upper cowling for BPFS-0169 (made to order)
This race upper fairing is made from a modified street version by filling in the headlight hole (s) and blending with the surrounding surface area.