Fitting Kit for Tail Light, RC30
€43.88
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYBP-0297
SKU: hon-11519 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsSeat set street GRP GP-T, Honda VFR400 NC30
€1,096.34
The ultimate seat set for your V4 Honda!
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC30 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC30 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box. The taillight used in this kit, is LED and may not comply with road use regulations in some territories,( though we have not heard of any issues after selling them worldwide for ten years).
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this seat cowlng set BPFS-0149 which is made using GRP (glass reinforced plastic) which is primed and ready for paint
** we offer a similar product using carbon fiber panels finished in high gloss UV protective clearcoat. See BPFS-0151
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0148
SKU: hon-10583 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30Seat cowling ( GRP) NX6, NSR500V
€323.38
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Carbon tail light surround satin, Honda NSR250
€110.40
Taillight Surround (Carbon), NSR250 MC21, Satin
This carbon taillight surround replaces the stock plastic part and is easy to install to give your bike a fresh and individual appearance.
Note, TYGA decal peels off if not required.
TYGA no: BPCX-0003fÂ
SKU: hon-10572 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250, NSR250 MC21, ShopCarbon holder brake hose "NSR500V style), NSR250 MC28 – NC30 – NC35
€45.78
Holder, Carbon, Brake Hose, NSR500V Style
This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.
It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.
Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.
TYGA no: BPCC-0051
SKU: hon-11203 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC28, NSR500V NX6, RS250R NF5 / NX5, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Seat set street T13 with carbon, Honda RVF400 NC35
€1,102.07
This set of bodywork is designed to replace the NC35 stock seat cowling with our T13 seat cowling kit and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.
This product is suitable for the NC35 and is the deluxe version without carbon fiber front section, undertray and carbon between air ducts on top and underneath. We also offer a budget version of the same kit, see also BPFS-0117.
TYGA no: BPFS-0118
SKU: hon-10316 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopUpper cowling RSW street, Honda NSR250 MC21/MC28
€219.65
Stylish replacement fairing based very closely on the GP250 RS250RW World championship winning race bike design. This upper cowling has been designed to be used on a street bike and uses a bright modern headlight unit with built in turn signals (BPLT-0011 ). This upper cowling is designed only to be used with our latest redesigned GP250 lower cowling BPFL-9014 combining for the ultimate in NSR250 race fairing design. We recommend this fairing to be used with TYLY-0001 GP upper stay and our GP mirrors TYMR-0001.
This cowling is supplied with a cowling meter stay extender to mount to the meterstay. This changes the position the fastener screws in to match the RSW upper cowling and to move it forward for a perfect fit.
Compatible Parts:
BPFL-9014 lower cowling
requires headlight BPLT-0011 and screen SCRE-0079, and SCRE-0080
TYGA no: BPFU-9012
SKU: hon-10239 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, By model, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon tank protector, Suzuki RGV250 Vj21
€180.64
Carbon Tank Protector, Suzuki RGV250 VJ21
This real carbon protector is designed to fit snuggly on the RGV250 VJ21 fuel tank and will prevent scratches from zippers etc. It will also add some individual style to your pride and joy.
TYGA no: BPCC-9037
SKU: suz-10143 Categories: ALL products, Bodywork and carbon, RGV250 VJ21, Shop, Suzuki, Various parts