Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Seat set with carbon race, Honda NSR250 MC21

606.64

(734.03 inc. VAT )

This set of bodywork is designed to replace the stock seat cowling with the race version of our GP Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21 but also an MC28 fitted with an MC21 fuel tank. The kit comprises of the parts below which are also available separately.

We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.

BPFS-0003 (street)

BPFS-0004 (race)

uses BPFT-9002 MC21 with carbon front section

BPFS-0059 (street)

BPFS-0060 (race)

uses BPFT-9102 MC21 all GRP construction

BPFS-0004 (street)

BPFS-0005 (race)

uses BPFT-9012 MC28 with carbon front section

BPFS-0045 (street)

BPFS-0046 (race)

uses BPFT-9112 MC28 all GRP construction

The advantages of this seat cowling over stock include:

– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent

– higher at the rear, to give the bike a more agressive stance

– better rider control by use of enclosed seat area

– improved strength with precision in design and fitment as well as lighter weight.

TYGA no: BPFS-0004

SKU: hon-10224 Categories: , , , , , ,
Read more

Silencer aluminium round 43mm, Kawasaki ZXR250 2008 –

216.12

(261.51 inc. VAT )

Silencer, Aluminium, Round, 43 mm. x 380 mm., Assy.

This silencer has polished stainless steel endcaps and a tough anodized aluminium tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.

The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.

Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.

Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.

TYGA no: EXSL-0033

SKU: kaw-10021 Categories: , , , , , ,
Read more

Carbon fairing set street GP-T, Honda RVF400 NC35

1,700.36

(2,057.44 inc. VAT )

The ultimate faring set for your Honda RVF400 NC35!!

Kit, Fairing Set, Carbon, (Street), NC35 GP-T

This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers a useful weight saving and easy fitment and removal. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.

Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.

As well as this fairing BPFS-0147 which is made using carbon fiber panels finished in high gloss UV protective clearcoat, we offer a similar product using GRP (glass reinforced plastic) which is primed and ready for paint**. See BPFS-0145

* A clear screen is provided unless you specify tinted in the comment box at check out.

** We recommend trial fitting and making and minor adjustments before painting

TYGA no: BPFS-0147

SKU: hon-10602 Categories: , , , , ,
Read more

Trottle cable A, Honda NSR250 MC21

68.40

(82.76 inc. VAT )

Throttle Cable A, MC21

TYGA no: 17910-kv3-830

SKU: hon-10706 Categories: , , , , ,
Read more

Top triple clamp MiniRacerXtreme, Honda MSX125 GROM

142.25

(172.12 inc. VAT )

Top Triple Clamp, MiniRacerXtreme, MSX125 Grom

TYGA no: TYLY-0105

SKU: MSX-10271 Categories: , , , , , , , ,
Read more

Seat Cowling (GRP), NX5 RS250R, Assy.

402.02

(486.44 inc. VAT )

Seat Cowling (GRP), NX5 RS250R, Assy.

Although the late model stock shape NX5 RS250R works well, to our eyes it is a bit lacking in lines and we prefer the 1995 factory NSR racer look as ridden by Ukawa and Okada. We therefore decided to make a similar style seat cowling which would be a direct fit for the NX5. The seat uses a lightweight aluminium stay (included) to relocate the rear mounting bolts from the sides to the seat pad area and is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.

Comes with seat support BPFX-9036

TYGA no: BPFT-9036

SKU: hon-10907 Categories: , , , , ,
Read more

Seat set street with carbon RC211V, NC30

783.00

(947.43 inc. VAT )

This set of bodywork is designed to replace the stock seat cowling with the street version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock unit.

This product is suitable for the NC30 and is the deluxe version with carbon fiber front section for added strength and enhanced looks. We also offer a budget version of the same product without the carbon, see:

BPFS-0028 (race GRP)

BPFS-0034 (street GRP)

Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.

Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.

TYGA no: BPFS-0027

SKU: hon-10069 Categories: , , , , , ,
Read more

Lower Triple Clamp, CNC Black, CBR600RR Forks/NSR Shaft

367.66

(444.87 inc. VAT )

Lower Triple Clamp, CNC Black, CBR600RR Forks MC21/MC28 Shaft

CNC machined TYGA lower triple clamp for the NSR250 MC21 and MC28 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your order that you need 54 mm and not the default 53mm.)

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

This product does not include headstock seals or bearings. To complete the set we recommend you also order:

Seals: 53214-371-010 & 53214-KA4-701

Bearings: 91015-KT8-005 & 91016-KT8-005

This product is also sold as part of a set

TYLY-1741 Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC21.

TYLY-1841 Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC28.

TYGA no: TYLY-1942N

SKU: hon-10788 Categories: , ,
Read more