Set full race system under belly with long stainless silencer with carbon cap, Honda Monkey 125 2018-
€480.85
Set, Pipe, Full System, Underbelly, Monkey 125, Stainless Oval/Carbon End Cap, Long
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).
Note that once the stock system has been removed from the Monkey, there is an empty space under the seat on the right side. We recommend installing TYGA Performance product BPCC-7142R which has been designed to mirror the left side cover. This will fill in the gap under the seat and complete the transformation. Refer to photos of the exhaust installed for more details.
See also set with the Carbon Side Cover Included : EXPS-0107
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0109) with no other changes to the stock bike.
A useful increase in peak power and further gains could probably be had with remapping etc.
Similar Products:
Please also see:
EXPS-0110 Stainless, Underbelly, with short silencer
EXPS-0107 Stainless, Underbelly with long Silencer and Carbon side Cover
EXPS-0108 Stainless, Underbelly with short Silencer and Carbon side Cover
Key holder CNC black, Aprilia RS250
€78.51
gnition Switch Holder, CNC Black, Aprilia RS250
This is a removable ignition switch holder for our Aprilia RS250 top triple clamp. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-1053.
TYGA no: TYLY-1153
SKU: apr-10013 Categories: ALL products, Aprilia, CNC parts, CNC parts, RS250, ShopPillion seat cover “GRP”, KTM RC390 2022 –
€81.19
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPFX-7731
SKU: ktm-10211 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsUndertray seat cowling VJ22 TYGA, Suzuki RGV250 VJ22
€73.06
One of our most popular TYGA bodykits from last years.
Designed for the Suzuki RGV250, but used on many bikes all over the world.
This set of bodywork comprises of the parts below which are also available separately.
This kit is supplied with all additional fasteners required to mount it to a stock VJ22
If you have left and right exiting chambers (side by side) you will need to add 1 X TYLY-0029 to your order (Only one supplied in kit for twin right exiting chambers)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFX-9026
SKU: suz-10105 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiBearing Headstock Upper
€47.34
Bearing Headstock Upper
TYGA no: 91015-KT8-005
SKU: hon-11121 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Exhaust Chamber, Left, Side By Side Type, Stainless Steel, RGV250 VJ22
€320.38
Bare replacement left side chamber for EXCS-0009L
Kit, Single Seat Cover Conversion, Green, Ninja 250R/300R 2013 -18
€173.72
Kit, Single Seat Cover Conversion, Green, Ninja 250R/300R 2013 -18
TYGA no: 99994-0354-777
SKU: kaw-10160 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopCarbon engine cover left, Honda CBR1000 2008 -15
€102.42
Engine Cover, Left, (Carbon) 2008-15 CBR1000RR
This lightweight carbon cover fits over the engine case and has kevlar reinforcing, designed to protect your engine against scratches and damage in the event of an accident.
Beautiful, perfect fitment and give your bike that HRC look.
TYGA no: BPCC-8101L
SKU: hon-10446 Categories: ALL products, Carbon, CBR1000 2008-11, CBR1000 2012-, Honda, Shop