Handle bar set racing “hinge type” black, KTM RC125/RC200/RC390 2014- 21
€247.11
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1631
SKU: ktm-10218 Categories: ALL products, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, Stock list, all modelsSeat Cowling ( GRP) MC18, Stock Shape, Single Seat, Taillight Holes
€263.33
Seat Cowling (GRP), NSR250 MC18, Stock Shape, Single Seat, Taillight Holes
This seat cowling is a direct replacement for the stock plastic seat cowling and is exactly the same shape.
TYGA no: BPFT-0122
SKU: hon-10912 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopCowling Right white, Honda MSX125 GROM
€23.35
Cowling Right white, Honda MSX125 GROM (msx-10013)
OEM Honda part
TYGA no: 77215-K26-900ZB
SKU: MSX-10013 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopLower Triple Clamp, CNC Black, RVF400R Forks / NC30 Shaft
€367.66
Lower Triple Clamp, CNC Black, VFR400R Forks/NC30 Shaft
CNC machined TYGA lower triple clamp for the Honda VFR400R/NC30 to take RVF400/NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-MR7-003
Bearings: 91016-MR7-003
This product is also sold as part of a set
TYLY-1644 Triple Clamp Set, CNC Black,RVF400/NC35 forks to fit RVF400R/NC30.
VHM cylinder head (2 pieces), Yamaha TZ250 1995 ’02
€574.90 €512.20
VHM cylinder head (2 pieces), Yamaha TZ250 <’02 (alg-10170)VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:2x cylinder head2x standard insert (12.0cc)This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA bike dust cover two tone Yellow/black, Yamaha
€65.05
TYGA Bike Dust Cover, Red/Black, DUCATI
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
Please contact us for your special requirements for custom-made dust covers or custom screen printing. Minimum order quantities apply.
TYGA no: TMER-0159
SKU: alg-10410 Categories: ALL products, Bike covers, By model, Merchandise, RD350LC 4L0, Shop, TZR250 3MA, Universal parts, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3Tank Protector, Carbon, NSR250 MC21
€120.42
Tank Protector, Carbon, NSR250 MC21
This real carbon protector is designed to fit snuggly on the NSR250 (MC21) fuel tank and will prevent scratches from zippers etc. It will also add some individual style to your pride and joy.
TYGA no: BPCX-0028
SKU: hon-11192 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21Exhaustset race Stainless steel double Stainless steel Silencers, NC30 NC35
€1,276.81
This exhaust system includes everything you need to replace the stock system. It includes, stainless pipe work, twin stainless steel silencers, springs, gaskets, silencer clamp, mounting stay and all other mounting hardware.
Dynograph shows totaly stock 35 compared to modded bike , twin stack tyga system, 1 layer race foam, short stacks, 125 mains front and rear, standard cdi.
This system can be used with stock Honda or Tyga bodywork/subframes.
TYGA no: EXPS-0005
SKU: hon-10106 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30