Exhaust set slip on, oval stainless silencer with carbon cap, Honda MSX125 GROM
€394.13
Set, Pipe, Slip On, MSX125 2013-14, Stainless Oval/Carbon End Cap
Made in stainless steel with spring mounted hairline finish stainless silencer, and precision made CNC machined end cap. This system significantly saves weight and gives the best bang for the buck! This systme is supplied with a decibel killer which significantly reduces noise without adversely affecting performance and with installed, this is currently our quietest exhaust system available for the MSX125. ideal for owners not wishing to disturb the neighbours! (May not comply with noise regulations for some states and territories)
This system is supplied with a stainless steel sleeve silencer EXSL-1142
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is from installing the TYGA Slip On set (EXPS-0040).
A useful gain all through the range. Note, this test was done without the decibel killer installed.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0051
SKU: MSX-10278 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, ShopOil seal (8x16x5) cylinder, RGV250/RS250
€3.30
Top triple clamp CNC black , Honda NSR250 MC18 1988
€235.86
Top Triple Clamp Set, CNC Black, NSR250 MC18, (1988)
CNC machined TYGA top triple clamp with detachable ignition switch/lock holder for your NSR250 MC18, (1988)
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race use.
TYGA no: TYLY-1070
SKU: hon-10704 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsBrembo Gold 84mm cast Caliper
€156.80 €139.28
Brembo Gold 84mm cast Caliper
These calipers are used on many European bikes, easy to install and give good quality for money.
Together with our TYGA bracket conversion it will update your bike to todays standard.
34mm pistons, bleed screw and banjo are reversible.
Order with trust.
TYGA no: 20.6951.46
SKU: alg-10253 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ22, RGV250 VJ23, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, Various partsSprocket holder CNC silver, Honda NSR250 MC21
€198.07
CNC machined TYGA sprocket holder for your NSR250 MC21R/SE/SP.
Designed and machined in house by TYGA, as a direct replacement for the ugly and heavy standard MC21 sprocket holder.
Crafted from aircraft spec 6061-T6 alloy, and supplied with bearing, seals and alloy (6061-T6) spacer, the sprocket holder is ready to fit.
Not only is this part a major cosmetic improvement, but it is only 60% as heavy as the OEM part. This means less unsprung mass, and also less rotational mass. The best case scenario.
TYGA no: TYLY-1043
SKU: hon-10394 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, ShopCarbon tank box cover, KTM RC125/RC200/RC390
€399.92
Tank Cover, (Carbon), KTM RC125, RC200, RC390
This component replaces the nasty plastic item, adds class to your ride and is an easy installation. Note this product consists of just the rear part of the tank cover. This product can only be ordered with battery box cover BPCX-7431B as product BPCX7431 to save on price and shipping costs.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCX-7431A
SKU: ktm-10033 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, KTM, RC 125/200, RC 390, ShopDecal, Tail Cowl Cover 250R Silver, Ninja 250R 2008 -12
€2.29
Decal, Tail Cowl Cover 250R Silver, Ninja 250R 2008 -12
TYGA no: 56054-0132
SKU: kaw-10192 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopExhaust Chamber, Right, Side By Side Type, Stainless Steel, Aprilia RS-250
€281.46
Bare replacement right side chamber for EXCS-0007