Side fairing right RC211V, NC30 NC35
€110.40
This a replacement part for bodywork sets BPFS-0012* , BPFS-0013, BPFS-0014, BPFS-0032, BPFS-0033. This part renamed from BPFU-9118R
*fits later model BPFS-0012, earlier BPFS uses another parts. If in doubt email us first before ordering
TYGA no: BPFU-9120R
SKU: hon-10095 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30Wiseco Piston, TYGA 300cc Big Bore Kit *
€227.29
The WISECO piston kit includes Piston, Rings, Wrist Pin and Circlips (2X) Use standard NSR250 Piston Bearing, 13111-KV3-771 (not included).
The WISECO pison offers great strength with light weight thanks to it’s forged design. And has a Zylan coated skirt for low friction.
This piston is a direct replacement for the ‘stock’ piston included in the TYGA 300cc big bore kit and gives greater scope for performance modifcation.
We offer this piston in two styles. Either shortened on the front side for the standard NSR250 crankcases, or full length for use in modified cases. Please add your choice of style to the comment box during checkout.
By default we will supply the shortened pistons.
Please contact us for instructions on modifying the cases for using full length skirted pistons
TYGA no: TPER-0026
SKU: hon-10882 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Exhaust Chamber, Right, Stainless Steel, MC21
€317.17
This is the bare right side replacement chamber in stainless steel for EXCS-0005A suitable for EXCS-005A and EXCS-006A for the MC21
Set pipe, Full race with round aluminium silencer NEW, Kawasaki ZXR250 2013 –
€557.94
2013-2017, Set, Pipe, Full Race System, Ninja 250R, Round Aluminium Silencer
We now have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 250 when used with the TYGA system*. Made in stainless steel with spring mounted round Aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an Round Aluminium silencer EXSL-0040
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0018.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 250 Exhaust pipe sections and silencers.
Bracket rear brake, 84mm Brembo conversion black, Honda MSX125 GROM
€100.41
Bracket, Rear Brake, 84mm Brembo Conversion, Black, MSX125 Grom
This is to fit the 84mm pitch rear caliper.
Also available in silver (TYLY-0093)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-1093
SKU: MSX-10078 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, ShopTop Triple Clamp, CNC Silver, NC35 RVF400
€196.92
Top Triple Clamp, CNC Silver, NC35 RVF400
CNC machined TYGA top triple clamp with detachable key holder for your RVF400 NC35
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
This product can be bought as a set TYLY-0042 with detachable ignition switch holder.
TYGA no: TYLY-0042(p)
SKU: hon-10784 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Stock list, all modelsSet exhaust pipe with stainless steel silencer, Yamaha R25/R3
€765.52
Set, Exhaust Pipe, Race System, Yamaha R25/R3, Stainless, Round Aluminium Silencer
This race system has been specifically developed for the Yamaha YZF R25 and YZF R3 and has been designed for optimum performance. It uses a stainless oval silencer with carbon end cap to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatiblity
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
No modification of bodywork is required, however, the emission canister must be relocated using the clamp provided.
Please also see EXPS-0072 EXPS-0073 and EXPS-0075 for similar system.
Performance and Dynograph
Please refer to dynographs
A) All Standard.
The standard exhaust system is replaced with the TYGA system. No modifications to the engine or fuelling were performed. Fitting a fuel controller could further increase the performance gains.
B) Airfilter/Airbox modification.
The standard exhaust system is replaced with the TYGA system. The airbox cover has been removed and a high flow filter fitted. This improves power all through the range. Fitting a fuel controller could further increase the performance gains.
TYGA no: EXPS-0074
SKU: yam-10061 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Yamaha, YZF-R25/R3Mirror blanking plate black, Honda VTR1000 SP2
€39.50
Handy mirror blanking plates for your VTR1000 SP2.
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
Mounting pitch is 40mm, so will fit many models.
2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can use your standard mirror mounting nuts to secure.