Kitaco camshaft type 2, Honda MSX125 GROM
€136.63
Developed specifically to increase the top end performance of your Honda MSX125 GROM.
KITACO Type 2 Camshaft
Direct replacement of the standard camshaft. Works with standard valves and valve springs.
This KITACO camshaft does not have the auto decompressor as used on the standard camshaft.
For those who want a Type 1 camshaft, please put this in the comment box at check out.
**Important** Must be used together with the KITACO i-Map Fuel Injection Controller (Map Setting #3). If used alone the engine will run lean and sustain damage.
TYGA no: 300-1432010
SKU: MSX-10308 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopCarbon rear hugger, Honda VTR1000 Sp2
€191.84
This stylish lightweight carbon hugger fits on the SP2 swing arm preventing rain and road dirt from reaching the rear suspension which can cause damage and corrosion. The hugger fits using only existing mounting points on the stock swing arm.
Please note that due to manufacturing tolerances between individual bikes, there is some difference in the exact mounting location from one bike to another. We recommend the use of silicone sealant as well as the fasteners provided to ensure a secure fit and prevention of damage to surface of swing arm.
This product is not suitable for the SP1 which uses a different shaped swing arm. See hugger BPCH-7120 for SP1 application
Beautiful, perfect fitment and give your bike that HRC look.
Section header for TYGA exhaust, KTM RC390
€195.20
Section, Header,Stainless, KTM RC390
Header exhaust, designed for unimpeded flow. Unlike the stock KTM header for the RC390, which has creases and dents to fit between the frame and engine, the TYGA header has been carefully fabricated to retain the round cross sectional area throughout, to avoid turbulent gas flow. Complete with Lambda sensor bung in the original position.
Compatible with the following exhausts:
Compatible with 2014-2016 KTM stock exhaust and other systems using the stock KTM header for those years.
Compatible with 2014-2016 TYGA exhaust systems EXPS-0061 and EXPS-0062
Included with 2017 on TYGA exhaust systems EXPS-0091 and EXPS-0092
TYGA no: EXPT-0003
SKU: ktm-10087 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopFairing set street T8, CBR250RR MC22
€1,247.92
This set of bodywork comprises all the bodywork parts including the passenger seat cover By ordering in one set you save money on the parts as well as save on shipping costs if you made the order in two or more separate shipments.
Please note parts are supplied unpainted and in white primer.
Replacement O ring, Exhaust Valve Cover, RGV250/Aprilia RS250
€7.71
Replacement O-ring, Exhaust Valve Cover, RGV250/Aprilia RS250
Replacement O-ring for Suzuki RGV250/Aprilia RS250 exhaust valve covers.
. Size: ID:62mm.
. C/S: 2mm.
Order 2 for 1 engine.
TYGA no: EXPR-0012
SKU: alg-10328 Categories: ALL products, Aprilia, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Various parts, Various parts, Various partsCarb Service Kit A, 36 pieces, Yamaha FZR400R 3EN1
€81.92
Carb Service Kit A, 36 pieces, Yamaha FZR400R 3EN1 and 3EN2
LiteTek Carburettor Seal Kit to suit: Yamaha FZR400R 3EN1 and 3EN2
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-001 Float Bowl Seal, Material: Flourosilicone (OE part number: 3GM-14997-00)
4x JH-002 Jet Housing Seal, Material: Viton 70A (OE part number: 3GM-14147-00)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A ( Part of Yamaha Assembly: Part Number 12R-14105-00)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel (OE part number:N/A)
4x OR-025 Top Cap O-Ring, Material: Viton 70A (OE part number: 3EN-14239-00)
4x SR-004 Main Jet SQ ring, Material: Viton70 A (OE part number: 1AE-14227-00)
4x OR-002 Float Mount O-Ring, Material: Viton 70A (OE part number: 3EN-14147-00)
4x OR-010 Pilot Merge Cavity O-Ring, Material: Viton 70A ( OE part number: N/A)
4x OR-018 Slide Housing O-Ring, Material: Viton 70A (OE part number: 1AE-14147-00)
Upper cowling (GRP) stock shape, HondaNSR250 MC18
€142.22
Upper Cowling (GRP), Stock Shape, Street, 1989, NSR250 MC18
Replacement Upper Fairing to be used with BPFL-9122 Lower Fairing.
Requires Screen: SCRE-0011 or SCRE-0012
For complete set with Lower, Upper and Screen order: BPFS-0173
TYGA no: BPFU-9322
SKU: hon-10918 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopBelly pan (GRP/carbon) Black, Honda MSX125 GROM
€309.98 €217.00
Belly Pan, (GRP/Carbon), MSX125, painted asteroid black metallic to match your bike. Bling up your grom with this cool component.
Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
High quality mounting hardware provided and easy to install.
We also offer the same product with carbon, see BPFL-7128
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href=”{{media url=”wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf”}}” target=”_self”>Click here for PDF</a></p>
TYGA no: Â BPCL-7228 BÂ
SKU: MSX-10191 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop