Front Fork Preload Adjusters blue/red (Pair), Honda MC18/MC21/MC28/NC30
€262.31
Fork Caps, Full adjustment.
Many race replica street bikes are graced with adjustable suspension as standard, but as with many ‘so-called’ adjustable suspension systems on production bikes, the actual adjustment available is very limited. The manufacturer lets you adjust within very tight parameters so that it’s difficult to get the settings wrong.
The TYGA fork tops do away with this dictator attitude, allowing you to take control of your set-up.
The preload adjustment is increased, with an extra 4mm possible, and we also provide a full 20 clicks of rebound adjustment that works!
Another great feature is the easy-turn knob for rebound adjustment. No more fumbling around for the screw driver.
The fork tops are manufactured from top quality anodized 6061 T6 aluminium and come ready to install, and are a direct replacement for the standard parts. Securing to the fork tube is by a pin spanner that is provided.
Basic suspension rebuild skills are useful for fitting, but full instructions will be provided.
Fits MC21SE/SP, MC28SE, MC18SP & NC30.
Please note that these Fork Caps will not work with ‘R’ spec NSR forks, or ’89 NC30, as these are preload adjustment only type forks.
TYGA no: TYLY-0038
SKU: hon-10355 Categories: ALL products, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Tank filler cap racing , Suzuki 4 hole
€69.87
Tank Filler Cap, Keyless, Racing Type, Suzuki 4 Hole
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for Suzuki sportsbike models which have 4 bolt mounting arrangement. See also the 3 hole model we supply (If in doubt, remove your existing filler cap to see which bolts actually mount to the tank and which ones are dummy ones for the outer ring only). Suitable for the following models:
- RGV250 VJ21, VJ22 and VJ23
- GSXR600 (1997 – 2003)
- GSXR750 (1996 – 2003)
- GSXR1000 (2001 – 2002)
- GSXR1300 (1999 – 2007)
- GSX600F (1998 – 2001)
- GS600F (2000 – 2001)
- GSF1200/Bandit 1200 (2001 – 2004)
- SV650 (1999 – 2002)
- TL1000S/R (All Years)
See also Suzuki 3 hole pattern
TYGA no: TYLY-0112
SKU: alg-10192 Categories: ALL products, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, Shop, Suzuki, Suzuki RGV250, Tank fillers, Various parts, Various partsMeter Stay Extension
€12.29
Replacement meter stay extension nylon shaft. Suitable for the following models:
BPFS-0079
BPFS-0092
See table for application of meter stay extensions with our body kits:
Inner Cowling, (Carbon), Stock Shape, NSR250 MC21/MC28
€189.63
Inner Cowling, (Carbon), Stock Shape, NSR250 MC21/MC28
Replace your stock plastic inner cowling with this trick looking carbon replacement. Installs in the same way as the stock one.
TYGA no: bpcc-0040
SKU: hon-10892 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopSeat Pad, NSR250V
€67.02
Kit, Seat Set, GRP, (Street), MC21, MC28, NSR250V
Modelled closely from the seat cowling taken off an actual NSR500V HRC factory machine, this seat cowling kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but in proportion to the NSR250. This seat cowling set can be installed with both the MC28 and the MC21, (though to fit it on a MC21 you will need an MC28 fuel tank or TYGA Fuel tank BPCG-0001 or BPFG-0001). The set consists of the parts shown below and has a taillight for street use and special mounting hardware and seat pad provided.
We have designed the seat cowling so that for fuel tank removal, there is no need to remove the seat cowling, making for quick and easy jet changes and maintenance etc. Note, you do not need to change the subframe for either the MC21 or MC28 models to install this seat cowling which bolts to the stock subframe holes at the rear and special front lower subframe mounting positions with all hardware provided. The seat cowling has threaded holes in the underside to attach exhaust stays TYLY-0243L and TYLY-0243R for use with NSR250V exhaust system EXCS-0047
We recommend installing this seat cowling set with fairing set BPFS-0195 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPSP-0008
SKU: hon-11062 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Exhaust Chamber, Right, GP Type, Stainless Steel, RGV250, VJ22
€281.46
Bare replacement right side chamber for chamber set EXCS-0010R
Front fork preload adjuster black/gold (pair), Ninja 400
€194.60
Front Fork Preload Adjusters, Pair, Ninja 400
These fully functional preload adjusters replace the blank end caps on the stock Ninja 400 front suspension. These caps allow the rider to increase the amount of preload on the internal springs, allowing for a better set up for your riding style or conditions. Essential for spirited riding through the twisties or track days and racing.
This modification allows preload to be increased from the stock setting by 12mm. The minimum setting gives the same preload as stock.
Supplied in black and gold anodised finish, these adjusters are as beautiful as they are functional.
TYGA no: TYLY-1099
SKU: kaw-10132 Categories: ALL products, Exhausts, Kawasaki, Ninja 400R 2018-, Various partsSet, mirror blanking plates L&R CNC silver, KTM RC series
€57.41
Wheel, Aluminium Spacer Kit, KTM Duke – RC Series
Update your bike with this great TYGA performance, KTM power part!!
This comprehensive kit is specifically designed for the KTM racer in mind. The wheel spacers have been cleverly designed to be captured in the seals (instead of being loose as they are with stock set up), enabling quick and easy wheel removal and installation; essential when every minute counts to get out in time for a session or race.
In addition, the spacers are all made out of high quality aluminium (6061-T6) instead of steel giving a useful saving of 65% in important unsprung weight.
Finally, we provide a complete set of high quality Japanese Koyo wheel bearings to replace the not so good ones supplied from the factory.
All in all, a useful and inexpensive upgrade. Now you really are ready to race!
Included in this kit are the following components:
Bearings
front wheel x 2
rear wheel x 2
sprocket carrier x 2
seals
front wheel x 2
rear wheel x 2
spacers
front wheel, left, right and centre
rear wheel, left, right, centre and sprocket carrier
Note: This product is only sold as a complete kit, and individual items are not available separately, sorry.
TYGA no: TYLY-0185
SKU: ktm-10192 Categories: ALL products, CNC parts, CNC parts, CNC parts, Duke 390 2017 -, KTM, RC 125/200, RC 390, Shop, Various parts