Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Steeringstop, NC30

20.02

(24.22 inc. VAT )

Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for brake hose stay on triple clamp. Required when fitting RC211V style fairings BPFS-0011, BPFS-0012

TYGA no: TPER-0017

SKU: hon-10120 Categories: , , , , ,
Read more

Carbon air duct NX6 NSR500V

139.58

(168.89 inc. VAT )

Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)

These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.

Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.

See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)

TYGA no: BPCX-9042

SKU: hon-11000 Categories: , , , ,
Read more

Carbon under cowling, Honda MSX125 GROM

303.55

(367.30 inc. VAT )

Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-

Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.

See also BPFF-7142 for GRP version.

*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.

TYGA no: BPCL-7048

SKU: msx-10474 Categories: , , , ,
Read more

VHM piston (flat top) RS125 NX4 1995-’10 – RS250 NX5/NXA 1993-’10

137.00

(165.77 inc. VAT )

Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)

Complete Bodywork kit which consists of the following products:

Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)

The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.

Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)

The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036

Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)

This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.

Seat Support NX5 RS250R (BPFX-9036)

Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)

TYGA no: APHO12521750 + size

SKU: alg-10399 Categories: , , , , ,
Read more

Lower Cowling, Rear, GRP, Stock Shape, RGV250 VJ23

142.13

(171.98 inc. VAT )

Chain Guard, Rear, Carbon, RGV250 VJ23

Fits: Suzuki RGV250 VJ23

TYGA no: BPFL-7346

SKU: suz-10200 Categories: , , ,
Read more

Set, Slip On, Stainless, Oval, Carbon End Cap, Ninja 400

382.38

(462.68 inc. VAT )

Set, Slip On, Stainless, Oval, Carbon End Cap, Ninja 400

This system comprising of a spring mounted stainless steel silencer with a sleek carbon end cap and stainless steel final section increases performance, saves weight and enhances the looks of the bike. Supplied with a removable decibel killer already fitted, this system is not loud. (May not comply with noise regulations for some states and territories).

Easy and quick to install, this exhaust system will give instant and noticeable improvements at an affordable price.

This system is supplied with oval stainless silencer with carbon end cap EXSL-0072

Note: This product utilizes the original Kawasaki mounting clamp from the stock exhaust

Can be used with both the stock exhaust hanger or the lightweight TYGA Ninja 400 exhaust Hanger (TYLY-0213

TYGA no: EXPS-0101

SKU: kaw-10099 Categories: , , , , ,
Read more

Belly pan race cup style, KTM RC390 (13-15)

160.51

(194.22 inc. VAT )

Belly Pan, Race, (GRP), Cup Style, KTM RC390

This lightweight belly pan is modeled on the KTM RC390 Cup shape, but being made from high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. It is reinforced with carbon/Kevlar at the mounting points and is primed and ready to accept paint.

This product is supplied with all mounting hardware (including the left rear stay which is not supplied with the KTM product) so you can install this with stock foot pegs or any other aftermarket make such as TYGA Performance. it is also supplied with a rubber bung to make the belly pan fluid retentive.

We aim to have this product in stock at all times for immediate shipping. No waiting or worrying about if the parts will arrive in time for your next race.*

Please note, this product fits the 390 only. For the 125 and 200 models, we don’t have information on if it will fit or not.

Update your bike with this great TYGA KTM power part!!

Read more

Carbon rear hugger, KTM Duke 125/200/390

110.40

(133.58 inc. VAT )

This rear hugger replaces the nasty plastic item, adds class to your ride and is an easy installation.

Update your bike with these beautiful carbon products, same shape as original. Fits in minutes.

TYGA no: BPCH-7031 

SKU: ktm-10004 Categories: , , , , ,
Read more