Steering Stem Conversion Kit, NSR/RS
€128.69
This conversion kit includes the parts you need to convert the complete USD front end from a Honda RS250 NF5/NX5/NA5 to fit the NSR250 MC21/28.
Parts included:
Steering Stem
Top Clamp Collar
Top Nut (TYLY-0027)
Steering Stopper bushes and bolts
To fit the parts you will need to press the RS stem out of the RS lower clamp. Remove the clip from the bottom of the RS shaft and re-fit this to the conversion shaft. Then press back into the RS lower clamp.
The top clamp collar is a press fit into the top clamp, from the top side. this resizes the top clamp to fit the conversion shaft.
Headstock bearings are OEM NSR items, or TYGA taper roller. These must be purchased separately.
The final attack is fitting the steering stoppers. To locate these, loosly fit the converted headstock to the NSR and then turn your steering to left and right, marking the location of the steering stopper positions to give you just enough clearance for no interference with radiator etc. Check and double check position, then drill (dia. 6.8mm) and tap to M8. Use the supplied M8 bolts to secure.
You can now fit the rest of your front end with ease.
TYGA no: TPER-0027
SKU: hon-10836 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250, NSR250 MC21, NSR250 MC28, Stock list, all modelsCarbon tail light cover TYGA, Aprilia RS250
€45.19
Cover, Carbon,Tail Light TYGA Aprilia RS250
This cover is made specifically for the TYGA Carbon , Race bodywork kit (BPFS-0167) Fills in the light holes to make a smooth seat cowling for race use.
Not suitable for the stock bodywork
TYGA no: BPCX-9530
SKU: apr-10088 Categories: ALL products, Aprilia, Bodywork, Bodywork and carbon, RS250Racing step CNC silver, NC30 NC35
€299.27
New improved design! Designed in-house by TYGA Performance using AutoCAD software, these CNC machine- made step kits are made from top grade aluminium. Now uses carbon heel guard on left side hanger (the right side carbon brake/heelguard shown in the pictures is an optional extra and can be ordered with your step kit, part number BPCC-9002).
Now includes rear brake light switch provision.
This step kit moves the peg position back 5 mm. and up 20 mm. from standard. Pitch of hanger frame mounting holes is 72 mm.
Reverse schifting is possible with this race step kit.
TYGA no: STAA-0003
SKU: hon-10108 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, RVF400RR NC35, Shop, VFR400RR NC30VHM cylinder head (2 pieces), Honda NSR250 MC21/MC28
€604.90 €544.41
VHM cylinder head (2 pieces), Honda NSR250 (alg-10096)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide, and we are now pleased to be able to offer their cylinder heads for use on the NSR250
VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.
During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.
The VHM cylinder head is designed with removeable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This head set comes with following parts:
2x cylinder head
2x standard insert (12.60cc)
These heads use a centrally located spark plug and coolant outlet spigot just like the standard NSR rear cylinder. Therefore an HRC style hose is required which must also be ordered.
1x HRC style coolant hose for front head (not shown) part no. alg-10102
TYGA no: AA33054
SKU: alg-10096 Categories: ALL products, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, Shop, VHM productsCarbon cover center RR, Honda MSX125 2021-
€91.54
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCX-7448
SKU: msx-10508 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopUpper cowling GP-T, Honda NSR250 MC21/MC28
€257.70
Upper Cowling Street (GRP), NSR250, GP-T, Assy.
Stylish replacement fairing designed in-house by TYGA Performance to give the NSR250 a contemporary look. This upper cowling utilizes stylish twin double unit LED headlight units, BPLT-0027. Together with lower cowling BPFL-9033 and other mounting hardware it comprises set BPFS-0137.
This cowling is supplied with a plastic bung to mount to the meter stay.
See also BPCU-9033 for carbon version of this product.
Compatible parts:
BPFL-9033 Lower Cowling
TYLY-0121 Upper Stay
BPLT-0027 Headlight
BPSY-0155 Fairing Adaptor Stay
BPSY-0143A Side Stay Kit
SCRE-0161 Screen, Clear GP-T, or SCRE-0162 Screen, Tint GP-T
TYGA no: BPFU-9033
SKU: hon-10533 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, NSR250 MC28, ShopTyga Step Kit Replacement M6 LH M. rod end, NSR150/250
€11.47
Replacement left hanger for your TYGA Step Kit. Complete with mounting bolts and bushes.
TYGA no: Stre-1106
SKU: hon-11526 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC21, NSR250 MC28, ShopBrake Lever, Front, Ninja 250R/300R 2008 -18
€30.05
Brake Lever, Front, Ninja 250R/300R 2008 -18
TYGA no: 46092-0028
SKU: kaw-10185 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, Shop