Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Stay, Silencer, KTM RC390 Serpent

56.39

(68.23 inc. VAT )

Stay, Silencer, KTM RC390 Serpent

TYGA no: BPSY-0167

SKU: ktm-10121 Categories: , , , , ,
Read more

Boyesen Dual reeds, Honda NSR125/NSR250

46.52

(56.29 inc. VAT )

Boyesen Dual reeds, Cagiva Mito125
Boyesen Power Reeds use a patented dual-stage fiberglass design for more airflow, more air velocity and more overall power.

Boyesen dual-stage power reeds produce a better throttle response right off idle and through the mid-range when compared to the traditional Power Reed setup.

For NSR125 order:

1 set

For NSR250 order:

2 sets

Read more

Carbon swing Arm Cover (left), Aprilia RS250

136.56

(165.24 inc. VAT )

This lightweight carbon cover fits over the stock swing arm on the Aprilia RS250. It is designed to protect against scratches and gives that Aprilia GP250 look to your bike! Fits in minutes.

TYGA no: BPCC-9112L

SKU: apr-10040 Categories: , , ,
Read more

Lower cowling RSW, Honda NSR250 MC21/MC28

241.68

(292.43 inc. VAT )

Modelled on the RSW GP race bike design and adapted to fit the NSR250, this lower cowling represents the ultimate in fairing design for the NSR. Keeping the width to an absolute minimum, the design gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and improved design giving excellent finish both inside and out. Weight is now only approx. 1 kg but strength retained using a lip around the edge.

This product is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.

Compatible products:

This product must be used with BPFU-9012

This lower cowling is designed to be used with stock or race systems though some spacing may be necessary to get clearance with chambers:

1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested

2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary

3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.

Read more

Upper Cowling (Street GRP), NSR250 New GP2010, Assy.

243.42

(294.54 inc. VAT )

A GP250 style upper cowling, improved for 2010. Sleeker and 300grams lighter than our previous BPFU-0005. This fairing has excellent aerodynamics for racing or road use. To be used with the parts below.

Compatible Parts:

Tyga lower cowling: BPFL-9114 Will not fit stock NSR250 lowers.

Requires headlight BPLT-0004 and screen SCRE-0084 or SCRE-0085.

Read more

Carbon tank cover, Yamaha R1 2007-8

224.38

(271.50 inc. VAT )

Tank Cover (Carbon) 2007-8 Yamaha R1.

Let your bike stand our from the crowd.

TYGA no: BPCX-7202

SKU: yam-10012 Categories: ,
Read more

Racing step kit CNC silver, Honda CBR400 NC29

337.10

(407.89 inc. VAT )

Designed and built in-house by TYGA Performance using CAD/CAM software, these CNC machine- made step kits are manufactured from top grade aluminium. Uses carbon heel guards on both sides.

This step kit moves the peg position back 10 mm. and up 25 mm. from standard. Pitch of hanger to frame mounting holes is 79 mm.

TYGA no: STAA-0021

SKU: hon-10369 Categories: , , , ,
Read more

Velocity Stacks, NC30, Kit, 4 pcs

149.37

(180.74 inc. VAT )

Fuel Tank, GRP, VFR400R NC30, Unpainted

Top quality reproduction of the steel NC30 fuel tank in GRP. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).

Using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).

Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.

Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.

Read more