Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Subframe aluminium , Honda VFR400 NC30

408.41

(494.18 inc. VAT )

This lightweight aluminium subframe is closely modelled on the stock NC30 subframe and can be substituted for the heavy steel one with a considerable weight saving . Made from extruded and CNC machined 6000 series aluminium, this product is hand-welded by our craftsmen to provide a strong, accurate and beautiful component. Finished in Hard wearing satin black powdercoating, it can be painted if the customer so chooses.

Note this subframe is for race and single seat use only and cannot be used for carrying a passenger. All mounting positions for exhaust stay, seat cowling, undertray, rear shock reservoir (BPCC-0046 is a direct fit), radiator overflow bottle, electrical components etc which are normally mounted to the subframe are supplied with subframe so it is almost a simple plug and play. Most of the standard fasteners are used, however where necessary, replacements are included.

If you wish to run this subframe without the rear fender, then this is also possible and we recommend installing it along with Seat cowling bracket part number: TYLY-0224-17 and battery box TYLY-0026. In this configuration, you will need modify the rear mounts of the battery box and drill them to attach to the subframe and to cable tie the ECU, starter relay etc which are normally attached directly to the undertray.

TYGA no: TYLY-0224

SKU: hon-10984 Categories: , , , , , , ,
Read more

Triple clamp set CNC silver, Honda NSR250 MC18/MC21

673.57

(815.02 inc. VAT )

CNC machined TYGA triple clamp set for your NSR250 MC21.

These stylish, all aluminium triple clamps are a direct replacement for the MC21 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!

They are delivered ready to fit with all bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

TYGA no: TYLY-0241 

SKU: hon-10266 Categories: , , , , , , ,
Read more

Step adjuster plate, NSR250 MC21/MC8

86.53

(104.70 inc. VAT )

Adjustable Footpeg Hanger Plate (Pair), MC21/28. These CNC machined plates are designed to take the stock Honda hanger plates allowing for three additional positions higher and further back over the stock position. See photos below for before and after with the middle position fitment. Also note fitment of the two bushes supplied for the left side due to the left hanger positions top and bottom not being in the same vertical plane.

Ideal for trackdays and those weekend ‘toe dragging’ hoons!

Positions: Back 20mm. Up 10mm, 20mm & 30mm

Includes all fitting hardware and extended link rod.

TYGA no: STAA-0018

SKU: hon-10367 Categories: , , , , , , ,
Read more

TYGA bike dust cover Black HRC street

81.90

(99.10 inc. VAT )

TYGA Bike Dust Cover, Black, HRC (street)

This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.

See also TMER-0124 for the “Race” version of this TYGA bike dust cover for (race) bikes with no mirrors

Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.

Read more

Switch assy winker , Honda MSX125 GROM

42.16

(51.01 inc. VAT )

Switch Assy. Winker

TYGA no: 35200-K26-901

SKU: MSX-10009 Categories: , , , ,
Read more

Under Cowl, Belly Exhaust Type, (GRP), Red, MSX125

196.87

(238.21 inc. VAT )

Under Cowl, Belly Exhaust Type, (GRP), Red, MSX125

Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. Although this will fit all MSX125 Groms with stock Honda or TYGA exhausts, it was designed specifically to be compatible with low mount belly exhausts including:

– Honda low mount stock exhausts supplied with the second generation 2016 MSX125SF models

– TYGA belly exhausts EXPS-0064 and EXPS-0068 (which are suitable for all model MSX125SF Groms)

See table below for more information.

Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.

<a href= {{media url= wysiwyg/46-undercowl-bpfl-cl-7328-online-e5eb2cb5.pdf }} target= _self >Click here for PDF</a>

Read more

Fairing set street T10, NC35 kit

746.54

(903.31 inc. VAT )

Fairing set street T10, NC35 kit

This set of bodywork comprises of the parts shown in the picture which are also available separately

*A clear screen is provided.

This kit is supplied with all additional fasteners required to mount it to a stock NC35. It uses the original stock Honda mirrors but requires the special meter and mirror stays supplie

TYGA no: BPFS-0090

SKU: hon-10131 Categories: , , , , ,
Read more

Kit, Fairing Set, Street, Single Seat, GRP, Stock Shape, VJ21

681.48

(824.59 inc. VAT )

Kit, Fairing Set, Street, Single Seat, GRP, Stock Shape, VJ21

Complete set of stock shaped bodywork for the Suzuki RGV250 VJ21

Consists of the following products ( also available seperatly)

BPFU-0019 Upper Fairing
BPFL-0019 Lower Fairing
BPFT-1019 Seat Cowling
BPFF-0019 Front Fender
SCRE-0120 Clear Screen

TYGA no: BPFS-0191

SKU: suz-10120 Categories: , , , , ,
Read more