Seat Cowling ( GRP) MC18, Stock Shape, Single Seat, Taillight Holes
€263.33
Seat Cowling (GRP), NSR250 MC18, Stock Shape, Single Seat, Taillight Holes
This seat cowling is a direct replacement for the stock plastic seat cowling and is exactly the same shape.
TYGA no: BPFT-0122
SKU: hon-10912 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopSilencer carbon round 43mm, Kawasaki ZXR250 2008 –
€284.06
Silencer, Carbon, Round, 43 mm. x 380 mm., Assy.
This silencer has polished stainless steel endcaps and a tough carbon tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2" external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0032Â
SKU: kaw-10023 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, Shop, SilencersCarbon swingarm covers, Honda CBR1000 2008 – 11
€235.94
These lightweight carbon covers fit over the stock swing arm and it is designed to protect against scratches and damage to your swing arm in the event of an accident. The right side also incorporates a ‘sharkfin’ compulsory in some classes of racing.
TYGA no: BPCC-8001
SKU: hon-10448 Categories: ALL products, Bodywork, CBR1000 2008-11, CBR1000 2012-, Honda, ShopKit, GRP, Complete bodywork set with Fuel Tank and Front Fender, painted Repsol, MC21, MC28 NSR250V
€3,668.44
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: BPFS-250VREPSOL
SKU: hon-11411 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopSilencer aluminium Classic “SHORTY” 60mm, 2 stroke stainless endcap
€76.12
Silencer, Shorty, Aluminium Classic, Two Stroke, Assy.
This shorty aluminium two stroke silencer has been designed for those owners of two stroke motorcycles looking for a more old fashioned classic look. They have similar dimensions and perform the same as our other two stroke silencers and are available with two different colour options for the exhaust exit cap and nozzle to suit the customers’ requirements.
Stainless steel pressed mounting end cap with 3 M6 threaded holes for mounting to exhaust chamber flange
Stainless steel exit end cap and long nozzle in traditional design with choice of raw stainless or black powder-coated finish
Cartridge glass wool insulation for greater longevity
Lightweight: weighs just 0.7kg
Tough anodised body finish for enhanced looks and weather resistance
Silencer is supplied with paper gasket and stainless steel bolts and washers.
“Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.”
Compatible Parts:
All Tyga Performance Two Stroke chamber sets. Remember to order enough silencers for one complete system!
Other Alternative Products:
EXSL-0001 Aluminium Classic
EXSL-9005 Aluminium Premium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
EXSL-0067 Shorty Aluminium Premium
EXSL-0065 Shorty Carbon
EXSL-0066 Shorty Carbon/Kevlar
TYGA no: EXSL-0002
SKU: alg-10369 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, ShopPassenger seat cover white/flad black, Honda MSX125 GROM
€132.00
Passenger Seat Cover, (GRP), MSX125 Grom.
This is the GRP version of our MSX125 passenger seat cowling in white with flat black number board as shown in the photos. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPCX-7128 in carbon fibre. See website for more details.
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFX-7128 W/F
SKU: MSX-10151 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopUpper cowling race, Aprilia RS250 Tyga, assy
€243.41
This upper cowling is to be used in our Aprilia RS-250 kit, BPFS-0101.
This product is compatible with lower cowling BPFL-9030. Will not fit stock Aprilia lower cowling
TYGA no: BPFU-9130
SKU: apr-10047 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, ShopSet, Exhaust Chamber, NSR500V Style, Stainless Steel, NSR250 MC28
€795.00
Set, Exhaust Chamber, NSR500V Style, Stainless Steel, NSR250 MC28
Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
For more information on how to get the best power out of this system, combine it with other parts of our MC28 Power Up Kit (see under ‘technical help’ on left hand menu) to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock foot peg hangers as well as work with our Tyga Performance step kit STAA-0002. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)
The NSR250V design, is provided with silencers clamping hardware which mounts directly to the NSR250V seat cowling BPFS-9043 or BPFT-9143 via exhaust stays TYLY-0243 for a more secure and firm installation.
By selecting stainless steel for longevity and beauty, TYGA systems offer unbeatable value.
Please note this product fits MC28 only although it can be installed with the MC21 if the MC21 has an MC28 swing arm installed. For the MC21 with a stock MC21 swing arm, please select EXCS-0005A
This product, EXCS-0047, has one chamber exiting left and one chamber exiting on the right in a high position similar to the NSR500V race bike. As a consequence, this system is only suitable for motorcycles without passenger foot pegs. For motorcycles with passenger foot pegs, please select EXCS-0006 and EXCS-0005B
Parts included with this product:
1 x left side chamber, side by side (left exiting) stainless steel
1 x right side chamber, side by side (right exiting) stainless steel
2 x silencer single clamps and mounting bolts, washers and nuts. Be sure to select the correct type. 70mm for silencers EXSL-0083 and EXSL-0084 and 60-61mm for silencers EXSL-9005, EXSL-0003, EXSL-0004, EXSL-0065 , EXSL-0066 and EXSL-0067
2 x manifolds
2 x mounting flanges
4 x mounting springs
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set. Note, we recommend that if you are installing this exhaust with seat set NSR250V BPFT-9043 or BPFT-9143 then order exhaust stay set TYLY-0234
TYGA no: EXCS-0047
SKU: hon-11045 Categories: ALL products, Exhausts, High performance, Honda, NSR250, NSR250 MC28