Lower Triple Clamp, CNC Silver, RVF400 forks/NSR shaft
€367.66
Lower Triple Clamp, CNC Silver, RVF400 forks/NSR shaft 1
Lower Triple Clamp, CNC Silver, RVF400 forks/NSR shaft 2Lower Triple Clamp, CNC Silver, RVF400 forks/NSR shaft 3Lower Triple Clamp, CNC Silver, RVF400 forks/NSR shaft 4
CNC machined TYGA lower triple clamp for your NSR250 to fit RVF400 NC35 forks.
Designed and machined in house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set
TYLY-0541Triple Clamp Set, CNC Silver, NC35 Forks to fit MC21
TYLY-0741Triple Clamp Set, CNC Silver, NC35 Forks to fit MC28
Registration/License Plate Holder, (Carbon), T13 Assy.
€136.75
This product is made using carbon fiber and holds the registration/license plate for use with our T13 seat cowlings. It is supplied with a registration/license plate illumination light for countries where this is a legal requirement. We also offer the same product but using only GRP, see BPFX-9118
This product attches by means of two bolts on an angled back flat plate and could be adpted to be used with other models with a flat undersurface.
TYGA no: BPCX-9118
SKU: hon-10823 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Set exhaust pipe with carbon silencer, Yamaha R25/R3
€917.05
Set, Exhaust Pipe, Race System, Yamaha R25/R3, Stainless, Round Carbon Silencer
This race system has been specifically developed for the Yamaha YZF R25 and YZF R3 and has been designed for optimum performance. It uses a stainless oval silencer with carbon end cap to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatiblity
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
No modification of bodywork is required, however, the emission canister must be relocated using the clamp provided.
Please also see EXPS-0072, EXPS-0074 and EXPS-0075 for similar system.
Performance and Dynograph
Please refer to dynographs
A) All Standard.
The standard exhaust system is replaced with the TYGA system. No modifications to the engine or fuelling were performed. Fitting a fuel controller could further increase the performance gains.
B) Airfilter/Airbox modification.
The standard exhaust system is replaced with the TYGA system. The airbox cover has been removed and a high flow filter fitted. This improves power all through the range. Fitting a fuel controller could further increase the performance gains.
TYGA no: EXPS-0073
SKU: yam-10060 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Yamaha, YZF-R25/R3Brake reservoir cap front, CBR125/CBR150/CBR250 2011 –
€24.45
Brake Reservoir Cap, Front, CBR125/150/250.
Suitable for all CBR 125 and 150 models and the 2011 CBR250R
TYGA no: 08F81-KPP-7A0A -
SKU: hon-10174 - hon-10176 Categories: ALL products, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CNC parts, Honda, Universal partsTop Triple Clamp, CNC Black, NC35 RVF400
€196.92
Top Triple Clamp, CNC Black, NC35 RVF400
CNC machined TYGA top triple clamp with detachable key holder for your RVF400 NC35
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
This product can be bought as a set TYLY-1042 with detachable ignition switch holder TYLY-1142.
TYGA no: TYLY-1042(p)
SKU: hon-10783 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Stock list, all models** special promotion** VHM-BILLET powervalve set, Suzuki RGV250 Aprilia RS250
€939.11 €844.21
** Special promotion ** VHM – BILLET Powervalve set,Suzuki RGV250 Aprilia RS250
Complete tuning set for your 2 stroke.
The sets contains:
2x VHM cylinder heads
2x VHM head inserts.
2x Billet powervalve left
2x billet powervalve right
This set is a must for every RS and RGV owner,
The billet CNC powervalves are fully tested on DYNO also on track and street bikes.
I think VHM needs no further introduction, but see video below.
Now we offer this set for an unbeatable price.
FREE SHIPPING ALL OVER EUROPE
TYGA no: special007
SKU: alg-10163 Categories: ALL products, Aprilia, High performance, High performance, High performance, RGV250 VJ21, RGV250 VJ22, RS250, Shop, SuzukiSilencer clamp double GP 70mm (single bolt)
€34.12
Clamp, Silencer, GP, 70mm (1x Bolt)
Designed to securely clamp 70mm. O.D. silencers. Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe clamping.
This double clamp is used to clamp 70mm diameter silencers. For 61 mm silencers, see EXCL-0011 .
This product, EXCL-0005, does not have a tab above the top silencer and is suitable for applications where the silencers are not secured to the subframe with an exhaust stay or they are secured to the bike by use of a central position such as on the VJ22 with standard Suzuki subframe. This clamp holds the two silencers in position and, as such provides a certain amount of rigidity . If for your application, you would like to use an exhaust stay mounted to the subframe to hold the silencers securely, and you can’t bolt the exhausts to the rest of the bike using the central mounting bolt but want a mounting bolt above the silencers, then we recommend using EXCL-0004.
Compatible with the following TYGA systems, when used with our 70mm silencers, EXSL-0083 and EXSL-0084:
EXCS-0006A
EXCS-0006B
EXCS-0008
EXCS-0010
TYGA no: EXCL-0005
SKU: alg-10262 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, NSR250, NSR250 MC21, NSR250 MC28, RGV250 VJ22, RS250, ShopCarbon sprocket cover, Honda NSR125 JC22
€122.86
Air Ducts, Pair, (Carbon) JC22 NSR125
Real Carbon fibre reproduction of the stock OEM Honda front fender. Finished in high gloss, adds beauty and makes your bike stand out from the crowd.
TYGA no: BPCX-5102
SKU: hon-11296 Categories: ALL products, Carbon, Honda, NSR125 JC22 1994 - 2003, Shop