Carbon fuel tank (early type), Honda RS250R NX5
€1,444.49
Fuel Tank, Carbon, RS250R NX5 (Early Type)
Top quality reproduction of the early non ram air version NX5 fuel tank in carbon fiber.
Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel, Avgas 100LL to E85 (85% ethanol). Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light ( 2.25 kg) Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts and following the stock shape, the following stock parts can be used (not included):
Fuel Cock
Breather
Front strap
Stock mounting rubbers
Filler cap and seal
IMPORTANT: Please note that this fuel tank, for ease of manufacture, uses the later flush fitting NX5 type filler cap. This can be purchased from HRC (part numbers 17521-NX4-680 for filler cap and 17515-NX5-770 for seal) or we can supply our own TYGA version (Cap: TYLY-0178A, Seal: BPSY-0238) Note the filler cap and the above list of parts are not included with the fuel tank and needs to be purchased separately.
TYGA no: BPCG-0003
SKU: hon-10946 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopThrottle Cable B, MC28
€32.37
Throttle Cable B, MC28
Similar quality (made in Japan) and replacement for Honda part number 17920-KV3-950
TYGA no: TYPP-0029
SKU: hon-10723 Categories: ALL products, By model, Honda, Honda OEM products, NSR250, NSR250 MC28, Various partsSeal Mechanical, Waterpump, MC21/28
€70.05
Seal Mechanical, Waterpump, MC21/28
TYGA no: 19217-KV3-831
SKU: hon-11090 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Section secondary B stainless RH exit, VFR750F gen 4, 94-97
€105.03
Section, Secondary B, R.H Exit, VFR750F, Gen 4, ’94-’97
Used on: Right Hand Exit Full Race Systems, VFR750R, Gen 4
EXPS-0131 Set, Pipe, Full Race System, R.H Exit, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0134 Set, Pipe, R.H Exit, Full Race System, Oval Carbon/Carbon End Cap Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer, VFR750F, Gen 4, ’94-’97
TYGA no: EXPT-8119
SKU: hon-11037 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Upper Cowling (GRP), NX5 RS250R (1995 NSR250 Style)
€303.70
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Requires screen SCRE-0173
TYGA no: BPFU-9336
SKU: hon-10982 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopSilencer oval carbon, Honda CBR500
€440.34
Silencer, Carbon, Oval/Carbon End Cap, 50.8 X 380 mm., CNC/Spring Mount, No Fittings.
The Dimensions of this silencer are as follows:
I.D. 50.8mm (slip-on section) O.D. 122mm x 90mm(diameter of stainless tube) L. 380mm Suitable for 300/500 cc medium capacity four stroke motorcycles.
TYGA no: EXSL-0043(p)
SKU: hon-10343 Categories: 4 stroke exhaust sets, ALL products, CBR500R, Exhausts, Honda, Shop, SilencersCrankshaft, Honda NSR250 MC21/MC28
€1,010.86
Crankshaft, MC21/28
This is a new OEM Honda part, ready for installation.
TYGA no: 13000-KV3-950
SKU: hon-10504 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopSet, Slip On, Stainless, Oval, Carbon End Cap, Ninja 400
€382.38
Set, Slip On, Stainless, Oval, Carbon End Cap, Ninja 400
This system comprising of a spring mounted stainless steel silencer with a sleek carbon end cap and stainless steel final section increases performance, saves weight and enhances the looks of the bike. Supplied with a removable decibel killer already fitted, this system is not loud. (May not comply with noise regulations for some states and territories).
Easy and quick to install, this exhaust system will give instant and noticeable improvements at an affordable price.
This system is supplied with oval stainless silencer with carbon end cap EXSL-0072
Note: This product utilizes the original Kawasaki mounting clamp from the stock exhaust
Can be used with both the stock exhaust hanger or the lightweight TYGA Ninja 400 exhaust Hanger (TYLY-0213
TYGA no: EXPS-0101
SKU: kaw-10099 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Kawasaki, Ninja 400R 2018-