Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Silencer carbon round (4 stroke) 2

348.60

(421.81 inc. VAT )

This silencer has polished stainless steel endcaps and a carbon fiber tube to produce an attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.

The ‘slip-on’ mount is 2 internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.

Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.

For use with pipe set EXPS-0012 or any system using a spring mounted 2 inlet.

TYGA no: EXSL-0012

SKU: alg-10029 Categories: , , , , , , , ,
Read more

Tyga Step Kit Replacement Right Side Hanger, MSX125 Grom, Silver, Assy.

90.48

(109.48 inc. VAT )

Replacement right hanger for your MSX125 Grom TYGA Step Kit. Complete with mounting hardware and bushes.

TYGA no: STAH-0036

SKU: MSX-10407 Categories: , ,
Read more

Carbon meter cover, NSR250 MC28

36.50

(44.17 inc. VAT )

Attractive carbon cover for MC28 meter assembly.

For fitment, simply remove the three retaining bolts, stick on the cover and replace the bolts

TYGA no: BPCC-0001

SKU: hon-10245 Categories: , , , , , ,
Read more

Gasket cylinder 0,4 NF5

12.29

(14.87 inc. VAT )

Gasket, Cylinder, 0.4mm NF5

Fits MC16~28. Use to adjust deck height/squish/compression ratio.

Read more

Seat set with carbon street, Honda NSR250 MC28

647.60

(783.60 inc. VAT )

This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.

We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.

BPFS-0003 (street)

BPFS-0004 (race)

uses BPFT-9002 MC21 with carbon front section

BPFS-0059 (street)

BPFS-0060 (race)

uses BPFT-9102 MC21 all GRP construction

BPFS-0004 (street)

BPFS-0005 (race)

uses BPFT-9012 MC28 with carbon front section

BPFS-0045 (street)

BPFS-0046 (race)

uses BPFT-9112 MC28 all GRP construction

The advantages of this seat cowling over stock include:

– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent

– higher at the rear, to give the bike a more agressive stance

– better rider control by use of enclosed seat area

– improved strength with precision in design and fitment as well as lighter weight.

TYGA no: BPFS-0005 

SKU: hon-10241 Categories: , , , , , , ,
Read more

Handle bar clamp right ” hinge type” black, KTM RC390 2014 -23

106.61

(129.00 inc. VAT )

Set pipe Full race system WSS300 (race), KTM RC390

This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.

And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.

By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.

The system features a primary silencer, which helps reduce the sound level without any loss of performance.

The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.

Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.

As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.

Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112

TYGA no: TYLY-1731R

SKU: ktm-10212 Categories: , , , , , , , , ,
Read more

Set pipe full system with stainless oval silencer, Honda Monkey 125 2018-

384.49

(465.23 inc. VAT )

Set, Pipe, Full Race System, High Level, Monkey 125, Stainless Oval/Carbon End Cap

This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! ( DB Killer included)

All fitting hardware included.

Performance and Dynograph

The blue trace shows the 100% standard Honda Monkey 125 compared to the red trace, which is after installing the TYGA Full System set (EXPS-0105)

A useful gain all through the range, increasing as the revs rise up to maximum.

Similar Products:

Please also see:

EXPS-0104 Moto Maggot High level System for Honda Monkey 125

EXPS-0106 Carbon Oval High level System for Honda Monkey 125

TYGA no: EXPS-0105

SKU: msx-10450 Categories: , , , ,
Read more

Seat pad small, flat

46.69

(56.49 inc. VAT )

Vinyl covered medium density foam race seat pad provides a maximum amount of feedback from the bike and minimum comfort!

Underside of seat has velcro stitched in. Kit is supplied with a strip of Velcro with strong 3M adhesive tape appied on the underside. Easy installment. Cut the strip to size using scissors, one each side recommended. Then simply peel back the protective layer on the adhesive strip, lay the strips on the seat cowling and place the seat pad in position.

Compatible Parts:

Tyga Tail cowling: BPFT-9026 and BPCT-9026

TYGA no: BPSP-0001B 

SKU: alg-10078 Categories: , , , , , ,
Read more