Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Triple Clamp Set, 3D, CNC Silver, CBR600RR forks to fit NC35

673.59

(815.04 inc. VAT )

CNC machined TYGA triple clamp set for your NSR250 MC28.

These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!

They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

TYGA no: TYLY-3315

SKU: hon-11248 Categories: , , , , ,
Read more

Passenger seat cover GRP, Honda VFR750F 4th gen (94-97)

102.28

(123.76 inc. VAT )

Racing Step Kit, Honda VFR750, Gen4 (1994-1997)

TYGA Performance racing step kit assembly. Designed in-house by TYGA Performance, these CNC machined step kits are made from top quality, aircraft grade aluminium. Features levers moving on ball bearings to give precise and smooth movement, and comes complete, ready to bolt on with stainless steel fasteners and all the required hardware.

Includes rear brake light provision, and retains the standard exhaust guard.

Carbon heel guards are included for both left and right hangers.

Peg position is 10 mm. up and 10 mm. back. Pitch of hanger to frame mounting holes is 78.6 mm.

TYGA no: BPFX-7149

SKU: hon-11360 Categories: , , , , ,
Read more

Carbon inner shrouds with grill (pair), Honda MSX125 GROM

298.74

(361.48 inc. VAT )

Carbon tank grilles to decorate your MSX125 Grom. Replaces the nasty plastic stock items and transforms the appearance of your bike. Uses original Honda mounting points and screws. Requires removal of the bodywork but the results are well worth the effort.

TYGA no: BPCX-7228

SKU: MSX-10124 Categories: , , , ,
Read more

Carbon chain guard set, Honda CBR250RR MC22

139.66

(168.99 inc. VAT )

Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22

CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.

TYGA no: BPCX-7210

SKU: hon-11464 Categories: , , , , , ,
Read more

Seat pad small, flat

46.69

(56.49 inc. VAT )

Vinyl covered medium density foam race seat pad provides a maximum amount of feedback from the bike and minimum comfort!

Underside of seat has velcro stitched in. Kit is supplied with a strip of Velcro with strong 3M adhesive tape appied on the underside. Easy installment. Cut the strip to size using scissors, one each side recommended. Then simply peel back the protective layer on the adhesive strip, lay the strips on the seat cowling and place the seat pad in position.

Compatible Parts:

Tyga Tail cowling: BPFT-9026 and BPCT-9026

TYGA no: BPSP-0001B 

SKU: alg-10078 Categories: , , , , , ,
Read more

Undertray, Street, (GRP), MC18, GP-T

42.91

(51.92 inc. VAT )

Undertray, Street, (GRP), MC18, GP-T

This product is to be used with BPFT-9035 and BPCT-9035 seat cowlings

Also to be used with BPFX-9133 Registration Plate Holder GP-T.

TYGA no: BPFX-9035

SKU: hon-10731 Categories: , , , ,
Read more

Carbon race airbox lid, Honda NSR250 MC21/MC28

210.89

(255.18 inc. VAT )

The stock airbox is restricted by the size of the inlet holes on the lid which limits the amountof power that can be unleashed from the NSR250. By replacing the stock airbox lid with the TYGA Performance version, the inlet to the airbox is more than doubled in size and the flow improved by having one large trumpet.

This product is a direct replacement for the stock one and uses all the stock hardware. It even has an ‘O’ ring groove so by removal and re-use of the stock airbox lid ‘O’ ring, a perfect seal with the airbox can be retained. A mesh is supplied in the airbox to hold the stock air filter securely in position.

As well as potential power improvements over the stock airbox, there is no denying it certainly looks a lot more trick than the Honda one too!

TYGA no: BPCX-9010

SKU: hon-10323 Categories: , , , , , , ,
Read more

Carbon rear hugger. KTM Duke – RC125/200/390

305.00

(369.05 inc. VAT )

Rear Hugger/Chain Guard Assembly (Carbon), KTM RC125, RC200, RC390

This rear hugger/chain guard assembly replaces the nasty plastic items, adds class to your ride and is an easy installation. Consists of the two products

Let your KTM RC stand out from the crowd this beautiful carbon product.

KTM powerpart!

Read more