Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Pillion seat cover “Black”, KTM RC390 2022 –

122.50

(148.23 inc. VAT )

Set pipe Full race system WSS300 (race), KTM RC390

This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.

And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.

By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.

The system features a primary silencer, which helps reduce the sound level without any loss of performance.

The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.

Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.

As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.

Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112

TYGA no: BPFX-7731black

SKU: ktm-10210 Categories: , , , , ,
Read more

Carbon Kit, Fairing Set, Honda NX5 RS250R (ram air)

2,468.27

(2,986.61 inc. VAT )

Kit, Fairing Set, Carbon, Honda NX5 RS250R (Ram Air)

Complete Carbon Bodywork kit which consists of the following products:

Upper Cowling Race, Carbon, NX5 RS250R (Late Model Style) (BPCU-9036)

The Carbon upper fairing is modelled off the last version of the NX5 RS250R but will fit any NX5 which has the ram air through the fuel tank system.

Lower Cowling, Carbon, NX5 RS250R (Late Model Style) (BPCL-9036)

The Carbon lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.

Seat Cowling Race, Carbon, NX5 RS250R (1995 NSR250 Style) (BPCT-9036(p))

Although the late model stock shape NX5 RS250R works well, to our eyes it is a bit lacking in lines and we prefer the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. We therefore decided to make a similar style seat cowling which would be a direct fit for the NX5. The seat cowling uses a lightweight aluminium stay to relocate the rear mounting bolts from the sides to the seat pad area and is covered underneath for streamlining and protection of the PGM and connectors.

Seat Support, Carbon, NX5 RS250R (BPCX-9036)

Screen Clear NX5 RS250R (Late Model Style) (SCRE-0168)

Made to order, takes approx 1 to 2 weeks to be ready for shipping

TYGA no: BPFS-0177

SKU: hon-10948 Categories: , , , , ,
Read more

Bracket front brake CNC black 84mm Brembo, Kawasaki Ninja 400

46.98

(56.85 inc. VAT )

Bracket, Front Brake, 40 mm Brembo Conversion, Black, Kawasaki Ninja 400

CNC machined brake caliper support for your Kawasaki Ninja 400.

Designed and machined in house. Crafted from 6061 T6 aluminium, this caliper support allows you to fit a Brembo Goldline P4 30/34 caliper (40mm mounting pitch) to your Ninja 400.

For race or track day use we recommend upgrading your master cylinder for ultimate stopping power.

Torque Setting: 35Nm

TYGA no: TYLY-1210

SKU: kaw-10154 Categories: , , ,
Read more

Carbon Console, (GRP) KTM RC125/200/250/390

200.66

(242.80 inc. VAT )

Console, (Carbon) KTM RC125/200/250/390

Replacement part to be used on TYGA upper cowling BPCU-7231(p)

Read more

Top Triple clamp CNC black , Honda NSR250 MC18/MC21/MC28

177.34

(214.58 inc. VAT )

Top Triple Clamp, Race, CNC Black, NSR250

CNC machined top triple clamp for your NSR250. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Facilitates mounting holes for securing the ignition switch holder assy (TYLY-0141).

Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.

TYGA no: TYLY-1041 

SKU: hon-10263 Categories: , , , , , , , , ,
Read more

Water Hose, NSR250 MC21/28

16.87

(20.41 inc. VAT )

Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970

Use this jet to blank of the power jet circuit in NSR250 carbs.

Read more

Nut, Flange, 8mm, MC28

0.86

(1.04 inc. VAT )

Nut, Flange, 8mm, MC28

TYGA no: 94050-08000

SKU: hon-11099 Categories: , , , , ,
Read more

Carbon fairing stay side 77mm (pair), Honda NSR250 MC21/MC28

82.47

(99.79 inc. VAT )

Fairing Stay, Side, Pair, Carbon

Designed to replaced fixed side stays these lightweight carbon fiber stays are supplied with nylon bungs and ‘R’ clips, for quick release. This product can also be used with many race fairings such as the TYGA Honda RSW and GP250 style or similar applications. See drawing for dimensions. Also see similar product BPSY-0143 Assy.

Dimensions:

BPSY-0143: length from centre of mounting hole to inside face of fairing with nylon bung = 87 mm.

BPSY-0143B: length from centre of mounting hole to inside face of fairing with nylon bung = 77 mm.

Compatible products:

TYGA upper cowlings, BPFU-0005, BPFU-9005, BPFU-9014

Read more