Cowling center flat black, OEM Honda part

Fastener, Quick Short, MC28

Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-

Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.

See also BPFF-7142 for GRP version.

*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.

We now make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. This product includes ONLY the seat cowling for replacement in the event of an accident or to use on a model other than the MC21 or MC28. For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification.

BPFS-0003 (street)

BPFS-0004 (race)

uses BPFT-9002 MC21 with carbon front section

BPFS-0059 (street)

BPFS-0060 (race)

uses BPFT-9102 MC21 all GRP construction

BPFS-0004 (street)

BPFS-0005 (race)

uses BPFT-9012 MC28 with carbon front section

BPFS-0045 (street)

BPFS-0046 (race)

uses BPFT-9112 MC28 all GRP construction

The advantages of this seat cowling over stock include:

– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent

– higher at the rear, to give the bike a more agressive stance

– better rider control by use of enclosed seat area

– improved strength with precision in design and fitment as well as lighter weight.

Tyga Performance Compatible Parts for this Product:

This product should be used with:

TYLY-0007 Subframe

TYLY-0006 Battery Box

BPSP-0001A Seat Pad

BPAC-0001 Rear Brake Reservoir Kit,

And also as well as the above on street versions:

BPLT-0008 LED Taillight

BPFX-9006 Registration Plate Holder

Set, Pipe, Stainless, Full Race System, Stainless Maggot Silencer, ZXR400L

This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs.

As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!

It uses the TYGA Moto Maggot silencer, this system may not comply to specific country noise emission regulations and is not homologated for street use. Actually it is extremely loud so be warned!.

Compatibility:

This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.

The oil cooler system can be retained. No modifications required.

Please also see EXPS-0137, EXPS-0138 and EXPS-0139 for similar system

Rear stand bobbins, in colour black or silver

Supplied with mounting bolts, these bobbins fit directly to the lugs provided on swing arms.

option: M6 – M8 – M10

TYGA Bike Dust Cover, Red/Black Honda RVF

This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.

Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.

Please contact us for your special requirements for custom-made dust covers or custom screen printing. Minimum order quantities apply.

Wheel, Aluminium Spacer, Bearing, and Seal Kit, (Orange) KTM RC and Duke Series

This comprehensive kit is specifically designed for the KTM racer in mind. The wheel spacers have been cleverly designed to be captured in the seals (instead of being loose as they are with stock set up), enabling quick and easy wheel removal and installation; essential when every minute counts to get out in time for a session or race.

In addition, the spacers are all made out of high quality aluminium (6061-T6) instead of steel giving a useful saving of 65% in important unsprung weight.

Finally, we provide a complete set of high quality Japanese Koyo wheel bearings to replace the not so good ones supplied from the factory.

All in all, a useful and inexpensive upgrade. Now you really are ready to race!

Included in this kit are the following components:

Bearings

front wheel x 2

rear wheel x 2

sprocket carrier x 2

seals

front wheel x 2

rear wheel x 2

spacers

front wheel, left, right and centre

rear wheel, left, right, centre and sprocket carrier

Note: We also offer a similar product in silver and kits for the wheel spacers only.