Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Set pipe full system with maggot silencer, Honda Monkey 125 2018-

442.31

(535.20 inc. VAT )

Set, Pipe, Full Race System, Monkey 125, Moto Maggot This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted Moto Maggot silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).</br>

Note that this exhaust system is supplied with mounting hardware so the original Honda exhaust guard can be installed with the TYGA Maggot system. However, this guard is not necessary and the exhaust system can be installed without the guard, as the pipework is not likely to contact the rider in normal operation.

All fitting hardware included.

</br>

<strong>Instructions</strong>

<a href= /media/wysiwyg/MSX-10449-fitman-exms0017.pdf target= blank >Download Instructions here</a>

</br>

<strong>Performance and Dynograph</strong>

The blue trace shows the 100% standard Honda Monkey, compared to the red trace, which is after installing the TYGA Full System set, Monkey 125, Moto Maggot. A useful gain all through the range, increasing as the revs rise up to maximum.

</br>

<strong>Please also see:</strong></br>

<a href= /index.php/set-pipe-full-system-with-carbon-oval-silencer-honda-monkey-125-2018.html >MSX-10451 Carbon Oval High level System, Monkey 125</a>

<a href= https://www.tygaeurope.com/index.php/set-pipe-full-system-no-silencer-honda-monkey-125-2098.html >MSX-10450 Stainless Oval High level System, Monkey 125</a>

TYGA no: EXPS-0104

SKU: msx-10449 Categories: , , , ,
Read more

Cowling left black, Honda MSX125 GROM

23.35

(28.25 inc. VAT )

Cowling left black, Honda MSX125 GROM (msx-10014)

OEM Honda part

TYGA no: 77225-K26-900ZA

SKU: MSX-10014 Categories: , , , ,
Read more

Lower triple clamp CNC Silver, Honda RVF400 -> CBR600 fork

367.66

(444.87 inc. VAT )

Lower Triple Clamp, CNC Silver, CBR600RR forks/NC35 shaft

CNC machined TYGA lower triple clamp for the NC35 RVF400 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

This product does not include headstock seals or bearings. To complete the set we recommend you also order:

Seals: 53214-371-010 & 53214-KA4-701

Bearings: 91015-KT8-005 & 91016-KT8-005

This product is also sold as part of a set TYLY-0742, Triple Clamp Set, CNC Silver, CBR600RR Forks to fit NC35.

TYGA no: TYLY-0942

SKU: hon-10551 Categories: , ,
Read more

Belly pan race cup style, KTM RC390 (16-)

160.51

(194.22 inc. VAT )

Belly Pan, Race, (GRP), Cup Style, KTM RC390 (16-18)

This lightweight belly pan is modelled on the KTM RC390 Cup shape, but being made from high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. It isreinforced with carbon/Kevlar at the mounting points and is primed and ready to accept paint.

This product is supplied with all mounting hardware (including the left rear stay which is not supplied with the KTM product) so you can install this with stock footpegs or any other aftermarket make such as TYGA Performance. it is also supplied with a rubber bung to make the belly pan fluid retentive.

We aim to have this product in stock at all times for immediate shipping. No waiting or worrying about if the parts will arrive in time for your next race.*

Please note, this product fits the 250 and 390 only. For the 125 and 200 models, we don’t have information on if it will fit or not.

Read more

Seat set street RC211V, NC30

637.59

(771.48 inc. VAT )

This set of bodywork is designed to replace the stock NC30 seat cowling with the street version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.

This product is suitable for the NC35 and is the base version without carbon fiber front section to keep the cost to a minimum. We also offer a deluxe version of the same product with carbon front section for enhanced looks and strength as well as a pure race one without the tailight or registration/license plate holder. See:

BPFS-0027 (street carbon)

BPFS-0028 (race GRP)

Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.

Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.

TYGA no: BPFS-0034

SKU: hon-10068 Categories: , , , , , ,
Read more

Seal, RC Valve Shaft, MC28

4.96

(6.00 inc. VAT )

Seal, RC Valve Shaft, MC28

TYGA no: 91201-PA9-004

SKU: hon-11116 Categories: , , , , , ,
Read more

Racing stepkit black/GOLD adjustable, Honda Monkey 2018

395.87

(479.00 inc. VAT )

Racing Rear Set Kit, Adjustable, Black, Monkey 125

With all major components designed specifically for the Monkey 125 in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners, new OEM Honda axle bolt and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items.

Notes:

No real brake light provision. If required, we recommend installation of inline pressure switch.

Fitting this rear set requires replacing the axle bolt with a slightly longer one, a new orginal OEM honda axle bolt is included

This rear set cannot be used in a reverse (GP) shift pattern

TYGA no: STAA-1027GOLD

SKU: msx-10419 Categories: , , , ,
Read more

Belly pan (GRP) RED, Honda MSX125 GROM

158.00

(191.18 inc. VAT )

Belly Pan, (GRP), MSX125, painted valentine red to match your bike. Bling up your grom with this cool component.

Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.

High quality mounting hardware provided and easy to install.

We also offer the same product with carbon, see BPCL-7228 shown in photos of belly pan fitted to bike.

Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.

<p><a href=”{{media url=”wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf”}}” target=”_self”>Click here for PDF</a></p>

TYGA no:  BPFL-7128 R

SKU: MSX-10187 Categories: , , , , , ,
Read more