Carbon Console, (GRP) KTM RC125/200/250/390
€200.66
Console, (Carbon) KTM RC125/200/250/390
Replacement part to be used on TYGA upper cowling BPCU-7231(p)
TYGA no: BPCX-7531
SKU: ktm-10106 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390Tyre warmers (set) superbike
€339.40 €305.74
All new TYGA Tyre warmers are specifically designed to meet the needs of every racer and track day rider.
Fully adjustable, digital temperature control allows you to set your tyre temperatures to suit every situation with just a press of a button. The remote control box allows for quick and easy monitoring of temperatures.
Tyre warmers are an essential tool for any track excursion. For the racer it allows for lightening first lap action to get the jump on your competitor, and for the track day specialist there’s no more wasted laps trying to get heat into your tyres.
Another great feature is that you can refit the warmers between session and just set at a lower temperature to stop your tyres heat cycling . This gives you more tyre grip for longer, so your tyre won’t go off half way through the day.
These wamers are designed for Superbikes running the usual 120 front tyre, and 190-200 section rear tyre.
TYGA tyre warmers are designed to run on 220V, and use a C type plug. Power rating is 550W rear and 450W front.
TYGA no: TWDS-0007
SKU: alg-10145 Categories: ALL products, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR900RR 1992- 95, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, Honda, Kawasaki, Shop, Suzuki, Tyre warmers, VFR750R RC30, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, ZX10R 2011 -15Kit, Seat Set, GRP, (Race), MC21, MC28, NSR250V
€432.66
Kit, Seat Set, GRP, (Race), MC21, MC28, NSR250V
Modelled closely from the seat cowling taken off an actual NSR500V HRC factory machine, this seat cowling kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but in proportion to the NSR250. This seat cowling set can be installed with both the MC28 and the MC21, (though to fit it on a MC21 you will need an MC28 fuel tank or TYGA Fuel tank BPCG-0001 or BPFG-0001). The set consists of the parts shown below and has special mounting hardware and seat pad provided.
We have designed the seat cowling so that for fuel tank removal, there is no need to remove the seat cowling, making for quick and easy jet changes and maintenance etc. Note, you do not need to change the subframe for either the MC21 or MC28 models to install this seat cowling which bolts to the stock subframe holes at the rear and special front lower subframe mounting positions with all hardware provided. The seat cowling has threaded holes in the underside to attach exhaust stays TYLY-0243L and TYLY-0243R for use with NSR250V exhaust system EXCS-0047
We recommend installing this seat cowling set with fairing set BPFS-0197 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0198
SKU: hon-11057 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Section, Secondary B, R.H Exit, VFR750F, 3rd Gen, 90-93
€107.88
TYGA no: EXPT-8151
SKU: hon-11343 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Silencer aluminium round 380mm (4 stroke) 2
€206.30
Silencer, Aluminium, Round, 2 x 380 mm., Assy.
This silencer has polished stainless steel endcaps and a tough anodized aluminium tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0040
SKU: alg-10138 Categories: 4 stroke exhaust sets, ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30, VFR750F Gen 4, 94-97Carbon front fender, Suzuki GSX 1000 K9-K11
€213.93
Lightweight carbon fibre direct replacement for Suzuki OEM item. Predrilled for use with stock mounting hardware.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
Bikini fairing (GRP) red Honda MSX125 GROM
€114.68
Bikini Fairing (GRP), MSX125 Grom
This bikini fairing is uniquely designed to blend with the stock bike’s styling and neatly integrate the headlight unit with the instrument cluster. Available in GRP shown here and also in carbon (see BPCU-7128). This unit can be installed on completely stock bike or with other TYGA products as shown in the photo.
Available in OE Honda colours to match your bike.
TYGA no: BPFU-7128 R
SKU: MSX-10210 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopCarbon passenger seat cover, Ducati monster 696/795/796/1100
€167.82
Passenger Seat Cover, (Carbon), Ducati Monster