Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Sidehanger right TYGA, Honda RS250 NX5

54.77

(66.27 inc. VAT )

Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts.

TYGA no: STAH-0044

SKU: hon-10691 Categories: , , , , , , ,
Read more

Fairing set street, Suzuki RGV 250

847.04

(1,024.92 inc. VAT )

Kit, GP-T Fairing Set, Street, VJ22 RGV250

This modern fairing, designed in-house by TYGA Performance, in the popular GP-T style is now available for the Suzuki RGV250 VJ22. As well as bringing the RGV250 VJ22 up to date, it also offers a useful weight saving and easy fitment and removal. The kit is supplied with all mounting hardware. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.

Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.

* A clear screen is provided unless you specify tinted.

TYGA no: BPFS-0187

SKU: suz-10118 Categories: , , , , , ,
Read more

Seat set street GRP GP-T, Honda RVF400 NC35

1,078.75

(1,305.29 inc. VAT )

The ultimate seat set for your V4 Honda!

This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC35 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.

The kit is supplied with all mounting hardware including subframe and battery box. The taillight used in this kit, is LED and may not comply with road use regulations in some territories,( though we have not heard of any issues after selling them worldwide for ten years).

Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.

As well as this seat cowlng set BPFS-0149 which is made using GRP (glass reinforced plastic) which is primed and ready for paint

** we offer a similar product using carbon fiber panels finished in high gloss UV protective clearcoat. See BPFS-0151

** We recommend trial fitting and making and minor adjustments before painting

TYGA no: BPFS-0149

SKU: hon-10582 Categories: , , , , ,
Read more

Clutch Cable, Ninja 250R 2008 -12

10.82

(13.09 inc. VAT )

Clutch Cable, Ninja 250R 2008 -12

TYGA no: 54011-0566

SKU: kaw-10207 Categories: , , , ,
Read more

Swing Arm, Cover Right, (Carbon) NSR250 MC21

126.42

(152.97 inc. VAT )

Swing Arm Cover, Pair, (Carbon) Honda NSR250 MC21

These lightweight carbon covers fit over the stock swing arm on the NSR250 MC21.

They are designed to protect against scratches and gives that NSR GP250 look to your bike! Fit in minutes.

TYGA no: BPCC-9212R

SKU: hon-10720 Categories: ,
Read more

Upper Cowling (Street GRP), NC30, Endurance Style

293.68

(355.35 inc. VAT )

Upper Cowling (Street GRP), NC30, Endurance Style

This is a replacement panel for set BPFS-0152. We recommend you order the complete set which is supplied with all mounting hardware and complete ready to install. This product is intended as a replacement part in the event of an accident or for people wanting to use it for a model other than the NC30`.

This product does not include any mounting hardware or headlight covers.

TYGA no: BPFU-9010(p)

SKU: hon-10738 Categories: , , , , ,
Read more

Top End Rebuild Kit MC18, Cyl. A, Assy.

293.88

(355.59 inc. VAT )

Below is everything you need to do a top end rebuild on your MC18. Suitable for cylinder ‘A’. One kit includes all parts for one cylinder. To overhaul both cylinders please order 2 kits.

There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.

Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm

Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm

Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm

Piston to bore clearance = 0.039mm – 0.045mm

TYGA no: NHPS-0002A

SKU: hon-10878 Categories: , , , , ,
Read more

Racing stepkit black/BLACK adjustable, Honda MSX125 GROM

395.87

(479.00 inc. VAT )

Racing Rear Set Kit, Adjustable, black with BLACK Slot Cover, MSX125 Grom

With all major components desgined specifically for the MSX125 Grom in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items. Be sure to order the correct colour combination. Some photos below are for reference and show different colours to this product.

Note, no real brake light provision. If required, we recommend installation of inline pressure switch.

You can only use these steps on the MSX125SF if you have a TYGA exhaust

<a href= {{media url= wysiwyg/05-fitting-msx-step-kit-online-6e1bce74.pdf }} target= _self >Click here for fitting instructions</a>

TYGA no: STAA-1019BLACK

SKU: MSX-10244 Categories: , , , , , ,
Read more