Exhauststay left TYGA VJ21, Suzuki RGV250 VJ21
€52.50
This product is designed to be installed as part of our TYGA Seat cowling kit for the VJ21 Kit BPFS-0121 and substitutes for the stock passenger peg hangers. It retains the use of stock mounting hardware and there is a level of adjustability in the mounting position due to the slot for the clamp position.
This product can be used as a stand alone item and does not need the rest of the kit and is suitable for replacing passenger pegs on any race VJ21 for example.
Please note this product is ‘handed’ and you need one of each TYLY-0100L and TYLY-0100R for one bike.
TYGA no: TYLY-0100L
SKU: suz-10100 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Set, Exhaust Chamber, NSR500V Style, Stainless Steel, NSR250 MC28
€795.00
Set, Exhaust Chamber, NSR500V Style, Stainless Steel, NSR250 MC28
Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
For more information on how to get the best power out of this system, combine it with other parts of our MC28 Power Up Kit (see under ‘technical help’ on left hand menu) to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock foot peg hangers as well as work with our Tyga Performance step kit STAA-0002. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)
The NSR250V design, is provided with silencers clamping hardware which mounts directly to the NSR250V seat cowling BPFS-9043 or BPFT-9143 via exhaust stays TYLY-0243 for a more secure and firm installation.
By selecting stainless steel for longevity and beauty, TYGA systems offer unbeatable value.
Please note this product fits MC28 only although it can be installed with the MC21 if the MC21 has an MC28 swing arm installed. For the MC21 with a stock MC21 swing arm, please select EXCS-0005A
This product, EXCS-0047, has one chamber exiting left and one chamber exiting on the right in a high position similar to the NSR500V race bike. As a consequence, this system is only suitable for motorcycles without passenger foot pegs. For motorcycles with passenger foot pegs, please select EXCS-0006 and EXCS-0005B
Parts included with this product:
1 x left side chamber, side by side (left exiting) stainless steel
1 x right side chamber, side by side (right exiting) stainless steel
2 x silencer single clamps and mounting bolts, washers and nuts. Be sure to select the correct type. 70mm for silencers EXSL-0083 and EXSL-0084 and 60-61mm for silencers EXSL-9005, EXSL-0003, EXSL-0004, EXSL-0065 , EXSL-0066 and EXSL-0067
2 x manifolds
2 x mounting flanges
4 x mounting springs
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set. Note, we recommend that if you are installing this exhaust with seat set NSR250V BPFT-9043 or BPFT-9143 then order exhaust stay set TYLY-0234
TYGA no: EXCS-0047
SKU: hon-11045 Categories: ALL products, Exhausts, High performance, Honda, NSR250, NSR250 MC28Triple clamp set CNC silver, Honda NSR250 MC18/MC21
€673.57
CNC machined TYGA triple clamp set for your NSR250 MC21.
These stylish, all aluminium triple clamps are a direct replacement for the MC21 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0241Â
SKU: hon-10266 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, ShopCarb Service Kit B, 19 pieces, Honda CBR400RR NC29
€31.32
Carb Service Kit B, 19 pieces, Honda CBR400RR NC29
LiteTek Carburettor Seal Kit to suit
Honda CBR400RR NC29
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x OR-019 Vacuum O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No.16040-MN4-003 superseded by 16040-MM5-601)
6x OR-016 Fuel O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-MN4-000)
4x OR-014 Float Breather O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No.16040-MN4-003 superseded by 16040-MM5-601)
4x CS-005 Choke PLunger Cap, Material: HNBR, (Part of Honda Assembly Part No. 16046-KT8-003)
3x SC-008 Throttle Synch Screws, Material: Stainless Steel
Please also see Honda CBR400RR NC29 Carb Service Kit A, 20 pieces.
TYGA no: CKB-Honda-NC29
SKU: alg-10355 Categories: ALL products, Carburettor Service Kits,, CBR400RR NC29, HondaBelly pan (GRP/carbon) RED, Honda MSX125 GROM
€309.98
Belly Pan, (GRP/Carbon), MSX125, painted Valentine red to match your bike. Bling up your grom with this cool component.
Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
High quality mounting hardware provided and easy to install.
We also offer the same product with carbon, see BPFL-7128
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href="{{media url="wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf"}}" target="_self">Click here for PDF</a></p>
TYGA no: Â BPCL-7228 R
SKU: MSX-10192 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopClutch Steel Plate B, MC28SP
€27.26
Clutch Steel Plate B, MC28SP
TYGA no: 22322-KV3-780
SKU: hon-11153 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Lock washer clutch, RGV250/RS250
€3.49
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Clamp, Silencer 2T, 70mm, Offset
€13.16
Clamp, Silencer 2T, 70mm, Offset
For use with Two stroke Silencers:
EXSL-0083
EXSL-0084
TYGA no: EXCL-0041
SKU: hon-11051 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RS250, Shop