Triple Clamp Set, 3D, CNC Silver, NC35 RVF400
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3313
SKU: hon-11264 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Stock list, all modelsSeat set street RC211V, NC30
€637.59
This set of bodywork is designed to replace the stock NC30 seat cowling with the street version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.
This product is suitable for the NC35 and is the base version without carbon fiber front section to keep the cost to a minimum. We also offer a deluxe version of the same product with carbon front section for enhanced looks and strength as well as a pure race one without the tailight or registration/license plate holder. See:
BPFS-0027 (street carbon)
BPFS-0028 (race GRP)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0034
SKU: hon-10068 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Rear wheel spacer kit aluminium, Honda NSR250 MC21
€73.71
Replace the heavy steel rear wheel spacers and wheel bearing distance spacer with these lightweight 6061-T6 aluminium spacers. Lighter weight allows the suspension to react more positively, so better handling and good looks!
TYGA no: TPER-0039Â
SKU: hon-10396 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, ShopCarbon tank shrouds with grill (pair), Honda MSX125 GROM
€184.44
Carbon tank grilles to decorate your MSX125 Grom. Replaces the nasty plastic stock items and transforms the appearance of your bike. Uses original Honda mounting points and screws. Requires removal of the bodywork but the results are well worth the effort. See BPCC-7128 for an alternative product.
TYGA no: BPCC-7828Â
SKU: MSX-10125 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopRacing stepkit adjustable (street), KTM RC390 2022-
€423.04
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: STAA-0037
SKU: ktm-10199 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarbon tank cover replacement, Honda MSX125 GROM
€126.79
Carbon tank cover. Direct replacement for the nasty the plastic stock item and transforms the appearance of your bike. Note, we also offer BPCX-7028 which is glues over the stock tank cover and requires no tools or removal of components. More choice with TYGA Performance!
TYGA no: BPCX-7928
SKU: MSX-10303 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopFairing set race GP-T, Honda VFR400 NC30
€722.77
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC30. As well as bringing the NC30 up to date, it also offers a useful weight saving and easy fitment and removal. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0163
SKU: hon-10630 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30Section, Right #2, KTM RC390 Serpent
€129.12
Section, Right #2, KTM RC390 Serpent
TYGA no: EXPT-0057
SKU: ktm-10119 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all models