Racing stepkit adjustable (race), KTM RC390 2022-
€423.04
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: STAA-0137
SKU: ktm-10198 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsInner cowling GRP stock “painted white” , NSR250 MC21/MC28
€156.17
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: BPFC-0040white
SKU: hon-11361 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, ShopCowling, Side, LH, Ebony, Ninja 250R 2008 -12
€259.23
Cowling, Side, LH, Ebony, Ninja 250R 2008 -12
TYGA no: 55028-0271-H8
SKU: kaw-10199 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopBrake lever titanium, NC30 NC35
€39.67
CNC machined from solid billet, this lever replaces the main section of the lever assembly and attaches to to the stock Honda adjuster and plunger to maintain that OEM feel. Easy to install.
These levers are designed to fit most of the Honda sports bikes of the 1990s:
MC19, MC22, MC18, MC21, MC28, NC23, NC29, NC30, NC35, RC30, RC40, RC45 etc.
TYGA no: LEVB-6011
SKU: alg-10053 Categories: ALL products, CBR400RR NC23, CBR400RR NC29, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, VFR400RR NC30Top Triple clamp CNC silver , Honda NSR250 MC18/MC21/MC28
€177.34
Top Triple Clamp, Race, CNC Silver, NSR250
CNC machined top triple clamp for your NSR250. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Facilitates mounting holes for securing the ignition switch holder assy (TYLY-0141).
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
TYGA no: TYLY-0041Â
SKU: hon-10264 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopStay, Coil, Carbon, NSR250 MC21/MC28
€35.12
Stay, Coil, Carbon, NSR250 MC21/MC28
This lightweight carbon coil stay replaces the stock item that the bike is supplied with (Honda OE part nr: 50285-KV3-950)
Fits:
Honda NSR250 MC21
Honda NSR250 MC28
TYGA no: BPCC-0065
SKU: hon-11210 Categories: ALL products, Honda, NSR250, NSR250 MC21, NSR250 MC28, Various parts, Various partsSilencer left shorty, carbon 70mm
€135.45
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
TYGA no: EXSL-0108L
SKU: yam-10090 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Shop, TZR250 3MA, YamahaCarbon sprocket cover, Honda Monkey 125 2022 5 speed
€126.94
Rear Fender, Carbon, stock shape, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
IMPORTANT, Rear fender BPCH-7042 is not compatible with the Honda number
plate holder (part number 80100-KOF-T00 ) due to the weight of the Honda
part. We recommend when installing BPCH-7042 that TYGA registration holder
BPCK-7142 is installed instead
TYGA no: BPCX-7742
SKU: msx-10513 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, Shop