Decal, Side Fairing, Ninja Silver, Ninja 250R 2008 -12
€7.11
Decal, Side Fairing, Ninja Silver, Ninja 250R 2008 -12
TYGA no: 56054-0056
SKU: kaw-10191 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopStep, R. Fr., MC28
€77.04
Step, R. Fr., MC28
TYGA no: 50660-KV3-700
SKU: hon-11144 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Tail light LED RC211V
€59.92
This tail light is wired to fit the stock NC30/35 wiring harness for tail light and brake light functions. It also has bullet connectors for connecting to the registration/license plate holder light. It is very light and is held in place by two sided adhesive tape. To be used on our RC211V and T13 style seat cowlings but could be adapted to fit any other model which has a near vertical surface to apply it to.
TYGA no: BPLT-0013
SKU: alg-10068 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30Carbon exhaust stay, Kawasaki ZXR400L
€95.39
Set, Pipe, Stainless, Full Race System, Stainless Maggot Silencer, ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs.
As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
It uses the TYGA Moto Maggot silencer, this system may not comply to specific country noise emission regulations and is not homologated for street use. Actually it is extremely loud so be warned!.
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
Please also see EXPS-0137, EXPS-0138 and EXPS-0139 for similar system
Front sprocket 14T, Honda MSX125 GROM
€7.37
14T steel front sprocket for Honda MSX125. Made by JT. To fit standard #420 chain.
TYGA no: JTA-H-WA-420-F-14T
SKU: MSX-10085 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Shop, Sprockets, SprocketsCollar/manifold Special , NSR250
€62.38
This is a special replacement part for the NSR250. The manifold has a CNC machined profile, matching the exhaust port exit to allow smooth exhaust gas transition from the cylinder into the expansion chamber. This helps to increase performance from as little as 7,000rpm all the way up to and beyond peak power.
Stephen A’lee of George White Superbikes in the UK independently dyno tested the manifolds on a stock engine MC21, with Stock airbox. The only mods were TYGA pipes.
The red trace shows the above bike using the supplied EXMN-0003 manifold with a peak of 57.2hp.
The blue trace shows the same bike with EXMN-9003 special manifolds fitted. A gain of 1.4hp with no jetting changes.
Compatible with the following TYGA system:
EXCS-0003
EXCS-0005
EXCS-0006
TYGA no: EXMN-9003Â
SKU: hon-10381 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Exhausts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopCowling left red, Honda MSX125 GROM
€23.09
Cowling left red, OEM Honda part
TYGA no: 77225-K26-900ZDÂ
SKU: MSX-10289 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopTriple clamp set CNC black, Honda NSR250 MC21 CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC21
CNC machined TYGA lower triple clamp for the MC21 NSR250 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-0012 when installing this triple clamp set for best clearance issue with the NSR fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1841
SKU: hon-10556 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, Shop