Tyga Step Kit Replacement Foot Peg, Slotted, Silver, Assy.
€42.34
Replacement foot peg for your TYGA Step Kit, slotted, silver. Complete with M8x40 mm. taper socket bolt for mounting. We recommend securing with thread locking agent to resist vibration.
Lower Cowling, Rear, Carbon, Special, RGV250 VJ23
€326.68
Chain Guard, Rear, Carbon, RGV250 VJ23
Fits: Suzuki RGV250 VJ23
Carbon carburettor tray, Honda VFR400/RVF400
€180.64
The carburetors on the NC30/35 are particularly prone to heat from the engine, which in turn heats up the fuel and lowers efficiency.
The TYGA carb tray for the NC30/35 aids in keeping the heat of the engine away from the carbs, and is fully compatible with all standard components. It will also help with keeping debris away from the carbs, if the carbs are being run full open.
No special tools are required to fit the carb tray.
TYGA no: BPCX-9309
SKU: hon-10360 Categories: ALL products, High performance, High performance, High performance, Honda, RVF400RR NC35, Shop, VFR400RR NC30Fork cap kit, Suzuki RGV250 Vj23
€317.71
After 20 years or so of hard use, many RGV’s damaged or scruffy fork caps. We know that it can really detract from an otherwise well restored bike if the fork caps are scuffed or dinged up. We therefore decided to reproduce the fork caps both for our collection and to offer to the public at the same time. CNC machined from 7075 T6 aluminium and brass and with the clear anodizing, just like the original OEM parts, these fork caps are the finishing touch of any RGV250 VJ22 restoration and install exactly the same as the original parts.
The 3 legged Spring Adjuster Plate is not included in this kit. Please reuse the original part.
Seat cowling stock race , Suzuki RGV 250
€252.35
Seat Cowling (Race, GRP), VJ22, Stock Shape, Assy.
This seat cowling is modelled from the original stock VJ22 shape and is suitable for all race classes but particularly those where the you need to keep the stock silhouette. It is a full-on race version with the seat area covered over for maximum rider feedback when on the limit.
Note that this panel is designed to make it possible to remove the fuel tank while the seat cowling stays installed. The panel is top quality, being lightweight, flexible and tough. Constructed with epoxy resin and multi layer 200 gram mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
Only available as race version, no street version with light provision.
TYGA no: BPFT-9226
SKU: suz-10094 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiCarbon ignitioncap, Aprilia RS125
€117.41
This lightweight carbon cover simply slips on over the nasty looking plastic one. It can be secured in place by silicone sealant or double sided tape
TYGA no: BPCC-7107
SKU: apr-10011 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS125, ShopCarb Service Kit A, 36 pieces, Suzuki GSXR400 (GK76)
€81.92
Carb Service Kit A, 36 pieces, Suzuki GSXR400 (GK76)
LiteTek Carburettor Seal Kit to suit: Suzuki GSXR400 (GK76)
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-007 Float Bowl Ring, Material: Flourosilicone (OE part number: 123258-33C00)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (OE part number: 13295-29900)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel (OE part number: 13291-2990)
4x JH-004 Jet Housing Seal, Material: Viton 70A (OE part number: 13251-33C00)
4x OR-001 Top Cap O-Ring, Material Viton 65 (OE part number: 13251-06C10)
4x OR-010 Float Mount O-Ring, Material: Viton 70A (OE part number: 13374-44030 superseeded by 13374-35C00)
4x OR-018 Slide Housing O-Ring (OE part number: 13278-47090)
4x OR-015 Main Jet Housing O-Ring, Material: Viton70 A (OE part number: 13294-33C00)
4x OR-010 Pilot Merge Cavity O-Ring, Material: Viton 70A (OE part number: N/A)
TYGA no: CKA-Suzuki-GSXR400-GK76
SKU: alg-10344 Categories: ALL products, Carburettor Service Kits,, SuzukiKit, Complete Body Set, Stock Shape, Solo Seat, NC30, Painted Type 1
€1,513.93
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFS-0221
SKU: hon-11400 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30