Stay, Front Fender, MC28
€10.86
Stay, Front Fender, MC28
TYGA no: 61101-KV3-700
SKU: hon-11141 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Belly pan (GRP) Black, Honda MSX125 GROM
€225.09
<p>Belly Pan, (GRP), MSX125, painted asteroid black metallic to match your bike. Bling up your grom with this cool component. Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.</p>
<p>High quality mounting hardware provided and easy to install.</p>
<p>We also offer the same product with carbon, see BPCL-7228 mounted on bike in photos.</p>
<p>Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.</p>
<p> </p>
<p><a href="{{media url="wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf"}}" target="_self">Click here for PDF</a></p>
TYGA no: Â BPFL-7128 BÂ
SKU: MSX-10186 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopAirbox Carbon/kevlar, Honda NSR250 MC21/MC28
€635.04
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPCX-0007
SKU: hon-11071 Categories: ALL products, Bodywork and carbon, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Exhaust set stainless steel, Honda NSR150
€346.46
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide, and we are now pleased to be able to offer their cylinder head for use on the NSR150SPThe VHM cylinder head is designed with removeable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (14.20cc)Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Top Triple clamp CNC silver kit, Honda NSR150
€218.46
CNC machined top triple clamp with detachable ignition switch/lock holder for your NSR150SP.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race use.
TYGA no: TYLY-0051
SKU: hon-10282 Categories: ALL products, CNC parts, CNC parts, Honda, NSR150SP, ShopReplacement Silencer, Full System, Stainless/Carbon End Cap, Yamaha R25/R3
€334.06
Replacement Silencer, Full System, Stainless/Carbon End Cap, Yamaha R25/R3
Used with EXPS-0072.
Racing stepkit silver/SILVER adjustable, Honda Monkey 2018
€477.27 €395.87
Racing Rear Set Kit, Adjustable, Monkey 125
With all major components designed specifically for the Monkey 125 in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners, new OEM Honda axle bolt and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items.
Notes:
No real brake light provision. If required, we recommend installation of inline pressure switch.
Fitting this rear set requires replacing the axle bolt with a slightly longer one, a new orginal OEM honda axle bolt is included
This rear set cannot be used in a reverse (GP) shift pattern
TYGA no: STAA-0027SILVER
SKU: msx-10424 Categories: ALL products, CNC parts, Honda, Monkey 125 2018-, ShopSide fairing left RCV211, CBR400RR
€167.21
This is a replacement part for bodywork set BPFS-0019