Kit, Fairing Set (GRP), Honda NX5 RS250R (ram air)
€908.45
Kit, Fairing Set (GRP), Honda NX5 RS250R
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (BPFU-9036)
The upper fairing is modelled off the last version of the NX5 RS250R but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (BPFT-9036)
Although the late model stock shape NX5 RS250R works well, to our eyes it is a bit lacking in lines and we prefer the 1995 factory NSR racer look as ridden by Ukawa and Okada. We therefore decided to make a similar style seat cowling which would be a direct fit for the NX5. The seat uses a lightweight aluminium stay to relocate the rear mounting bolts from the sides to the seat pad area and is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Stay NX5 RS250R (BPSY-0213)
Screen Clear NX5 RS250R (SCRE-0168)
TYGA no: BPFS-0172
SKU: hon-10904 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopSilencer carbon SHORTY 60mm 2 stroke
€156.20
This high quality shorty (55mm shorter than our other silencers) lightweight silencer (0.40 kg) is made from CNC machined end caps joined by a carbon fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.
Compatible Products:
All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0067 Shorty Aluminium
EXSL-0066 Shorty Carbon/Kevlar
EXSL-9005 Aluminium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
TYGA no: EXSL-0065
SKU: alg-10258 Categories: 2 stroke exhaust sets, ALL products, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Honda, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, Shop, Suzuki RGV250Fly screen H2C black, Honda MSX125 2021
€55.41
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: APK26PL64100ZA
SKU: msx-10473 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopCarbon fuel tank, Suzuki VJ22 RGV250
€1,225.57
One of our most popular bodykits from last years.
This kit comprises of the parts shown in the picture which are also available separately.
Light and strong, update your RGV250 with these great parts.
* A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock VJ22
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: 1900KT/P
SKU: suz-10233 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiKit, Bodywork, GRP, stock shape, with GRP tank, NSR250 MC28, Painted Rothmans
€2,968.09
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFS-0185
SKU: hon-10969 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersCarbon tank protectors MK1, Aprilia RS250
€90.01
Carbon tank protectors MK1, Aprilia RS250 (apr-10082)
Perfect for race but also road use, gives your bike that Gp look!
Product is of full carbon
TYGA no: 004400KT/P
SKU: apr-10082 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopTop Triple clamp CNC silver, Suzuki RGV 250 VJ23kit
€257.32
CNC machined top triple clamp with detachable ignition switch/lock holder for your RGV250 VJ23.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race use.
Cover, Clutch, Ninja 250R 2008 -12
€92.96
Cover, Clutch, Ninja 250R 2008 -12
TYGA no: 14032-0095
SKU: kaw-10222 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, Shop