Seat set street, Honda NSR250 MC28
€608.81
This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0045Â
SKU: hon-10243 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, By model, By product, Honda, NSR250 MC28, ShopExhaust section Mesh slip on 50mm
€92.22
Section, Mesh Slip-On, Stainless, Yamaha YZF-R25 and YZF-R3
For use with EXPS-0069 only.
The Slip joint is 2 internal, and can also be fitted to any 2 pipe
TYGA no: EXSl-0014
SKU: yam-10063 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Yamaha, YZF-R25/R3Carbon/kevlar headlight shroud (pair) GP-T
€100.33
Carbon/kevlar headlight shroud (pair) GP-T
TYGA no: BPKX-9433
SKU: hon-10543 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, NSR250 MC28, ShopGasket cylinder 0,4 NF5
€12.29
Gasket, Cylinder, 0.4mm NF5
Fits MC16~28. Use to adjust deck height/squish/compression ratio.
TYGA no: 12191-NF5-610
SKU: hon-10413 Categories: ALL products, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopUnder cowling (GRP) primer, Honda MSX125 GROM
€134.09
Under Cowl, (GRP), MSX125, primed ready for paint. Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. We also offer the same product in Carbon, see BPCL-7028.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: BPFL-7028
SKU: MSX-10328 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopDecal set, type 10 valentine red scheme, Honda MSX125 GROM
€53.08
Decal Set, MSX125, Type 10, 2015 Valentine Red Metalic Scheme. This set comprises of a complete set of all the OE Honda decals required for the painted panelson the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets.
TYGA no: STIC-0026Y
SKU: MSX-10314 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopStainless silencer 380mm
€231.41
Silencer, Stainless, Round, Four Stroke, 50.8mm., Assy
The Dimensions of this silencer are as follows:
I.D. 50.8mm (slip-on section) O.D. 4 inch. (diameter of stainless tube) L. 380mm Suitable for Ninja 250/300 and medium capacity four stroke motorcycles.
TYGA no: EXSL-0064
SKU: kaw-10066 Categories: 4 stroke exhaust sets, ALL products, Exhausts, SilencersRacing stepkit black/RED adjustable, Honda Monkey 2018
€477.27 €395.87
Racing Rear Set Kit, Adjustable, Black, Monkey 125
With all major components designed specifically for the Monkey 125 in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners, new OEM Honda axle bolt and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items.
Notes:
No real brake light provision. If required, we recommend installation of inline pressure switch.
Fitting this rear set requires replacing the axle bolt with a slightly longer one, a new orginal OEM honda axle bolt is included
This rear set cannot be used in a reverse (GP) shift pattern
TYGA no: STAA-1027RED
SKU: msx-10417 Categories: ALL products, CNC parts, Honda, Monkey 125 2018-, Shop