Kit, Complete Body Set, Stock Shape, with Fuel Tank and Seat Cover, NC30, Painted Type 1
€3,087.77
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFS-0220
SKU: hon-11401 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Section intermediate stainless exhaust, Honda MSX125 GROM
€64.13
Section, Intermediate, Stainless, MSX125 Grom
TYGA no: EXPT-0036
SKU: MSX-10139 Categories: ALL products, Exhausts, Exhausts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopEngine filler cap, Honda MSX125 GROM
€43.53
Engine Filler Cap, CNC, Grey, Genuine Honda Part
TYGA no: APK2615651TA
SKU: MSX-10039 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsScreen Clear, NSR250 MC18 ’89
€52.00
Screen Clear, 1989 NSR250 MC18, Kit.
1989 NSR250 MC18 screen clear
TYGA no: SCRE-0011
SKU: hon-10922 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, NSR250 MC18, Shop, Various partsCarbon Meter Cover RGV250 VJ21
€31.39
Carbon Meter Cover RGV250 VJ21
Attractive carbon cover for Suzuki VJ21 RGV250 meter assembly.
For fitment, push it over the instruments on one side until the foam compresses a little, you will then notice that the cover will then slide freely in towards the centre of instrument a couple of mm, allowing you more slack so you can locate it on the opposite side of the instrument. You need to locate over both rev counter and temp gauge at the same time. Once in position and properly located, you will notice it will slide around somewhat so, pick out the backing tape and the adhesive will hold it into desired position on the foam instrument surround. Alternatively, remove backing before installation but be careful not to lose adhesion or let cover get stuck in wrong position before you are satisfied it is properly located.
Fits all VJ21 Models
TYGA no: BPCC-0055
SKU: suz-10135 Categories: ALL products, RGV250 VJ21, Shop, Suzuki, Various partsTyga Step Kit Replacement Right Side Hanger, MC28, Assy.
€58.39
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts and bushes.
TYGA no: STAH-0002B
SKU: hon-10800 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28Step adjuster plate, NSR250 MC21/MC8
€86.53
Adjustable Footpeg Hanger Plate (Pair), MC21/28. These CNC machined plates are designed to take the stock Honda hanger plates allowing for three additional positions higher and further back over the stock position. See photos below for before and after with the middle position fitment. Also note fitment of the two bushes supplied for the left side due to the left hanger positions top and bottom not being in the same vertical plane.
Ideal for trackdays and those weekend ‘toe dragging’ hoons!
Positions: Back 20mm. Up 10mm, 20mm & 30mm
Includes all fitting hardware and extended link rod.
TYGA no: STAA-0018
SKU: hon-10367 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC21, NSR250 MC28, ShopBodywork Set 2, GRP, RC36-2 RC30 Style, Race
€3,181.20
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFS-0239
SKU: hon-11481 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist