Turn signal Set black, Honda RC30 style
€180.99
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPLT-0036
SKU: hon-11540 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, StocklistSection header stainless WSS300 race system, KTM RC390
€226.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0077
SKU: ktm-10135 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsLower cowlingstay left
€10.23
Lower left cowl stay set. Used with TYGA step kit STAA-0006.
TYGA no: BPSY-0074
SKU: apr-10030 Categories: ALL products, Aprilia, Bodykit replacement parts, CNC parts, RS250, ShopTriple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 Forks to fit NSR250 MC21/MC28
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3304
SKU: hon-11267 Categories: 4 stroke exhaust sets, ALL products, CNC parts, CNC parts, Exhausts, Honda, NSR250 MC21, NSR250 MC28, Shop, SilencersBelly pan (GRP/carbon) White, Honda MSX125 GROM
€309.98 €217.00
Belly Pan, (GRP/Carbon), MSX125, painted Himalaya white to match your bike. Bling up your grom with this cool component.
Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
High quality mounting hardware provided and easy to install.
We also offer the same product with carbon, see BPFL-7128
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href=”{{media url=”wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf”}}” target=”_self”>Click here for PDF</a></p>
TYGA no: Â BPCL-7228 W
SKU: MSX-10194 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopAirbox side cover, Honda RS250 NX5
€278.67
Carbon airbox side cover.
Fits the TYGA air box, it’s not known if it will fit the HRC one.
TYGA no: sspecial010
SKU: special010 Categories: ALL products, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various partsTail tidy street legal set , Honda MSX125 2021-
€101.18
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: TYLY-0274
SKU: msx-10498 Categories: ALL products, Honda, MSX125 2021-, Shop, Various partsTop Triple Clamp Nut (M24 x1), Honda MSX125 GROM
€25.75 – €25.76
Top clamp nut in colour. Light weight and good looking. Anodised for a long lasting finish. available in a variety of other colours. See photos.
This nut is a direct replacement to the top nut on many Honda machines, such as MSX125, MC18~28, RVF400, NSR150SP, CBR250/400/500, CBR900. (not suitable for NC30, RC30, SP2 but fits SP1)
The thread is M24x1
Torque setting: 65Nm
TYGA no: Â H136-A8Z1-0193GOLD-
SKU: msx-10203- Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020