Front fender (grp) stock shape, Honda RS250R NXA
€80.91
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Handle bar clamp pair ” hinge type” black, KTM RC390 2014 -25
€205.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731
SKU: ktm-10214 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsFork gear shift no.2, RGV250/RS250
€82.24
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Carbon Swing Arm Cover (pair), Aprilia RS250
€269.08
Carbon Swing Arm Cover (pair), Aprilia RS250
Very popular product, many swing arms have scratches, so with this beautiful carbon product you get rid of the scratches and also get that GP look.
Our products are of real carbon and have a perfect finish and fitting.
TYGA no: BPCC-9112
SKU: apr-10039 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopCover headlight upper cowling (pair) primer, Honda VFR400 – RVF400
€25.32
Cover, (primer), pair, Headlight, Upper Cowling, Endurance
To be used on the TYGA Endurance Fairings for NC30/35
TYGA no: BPFC-9010
SKU: hon-10645 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, VFR400RR NC30Footpeg replacement short, universal Tyga
€34.69
Replacement foot peg for your TYGA Step Kit, short type. Complete with M8x55 taper socket bolt for mounting and 3x 8mm washers. Ideal for racing for better clearance when fully leant over.
We recommend securing with thread locking agent to resist vibration.
Note compare to similar product STAP-0001 which is the same except 93 mm. instead of 78 mm. in length
TYGA no: STAP-0003
SKU: alg-10133 Categories: ALL products, Aprilia, CBR250R 2011 - 15, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, Kawasaki, KTM, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RS125, RS250, RS250R NF5 / NX5, RVF400RR NC35, Shop, Suzuki, Various parts, VFR400RR NC30, VTR1000Sp1SP2, Yamaha, YZF-R25/R3Upper cowling race with air duct, Suzuki RGV 250 Tyga, assy
€224.26
This upper cowling is to be used in our VJ22 kits, BPFS-0039 and BPFS-0040.
This product is compatible with lower cowling BPFL-0026. Will not fit stock Suzuki lower cowling
TYGA no: BPFU-9026Â
SKU: suz-10074 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiTop Triple clamp CNC black , Honda NSR250 MC18/MC21/MC28
€177.34
Top Triple Clamp, Race, CNC Black, NSR250
CNC machined top triple clamp for your NSR250. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Facilitates mounting holes for securing the ignition switch holder assy (TYLY-0141).
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
TYGA no: TYLY-1041Â
SKU: hon-10263 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop