O-ring fuel tap, NSR250 MC16- 28
€0.60
Piston D, MC21/28
TYGA no: EXOR-0053
SKU: hon-11443 Categories: ALL products, Honda, Honda OEM products, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various partsCarbon holder brake hose "NSR500V style), NSR250 MC28 – NC30 – NC35
€45.78
Holder, Carbon, Brake Hose, NSR500V Style
This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.
It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.
Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.
TYGA no: BPCC-0051
SKU: hon-11203 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC28, NSR500V NX6, RS250R NF5 / NX5, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Inner cowling GRP stock, NSR250 MC21/MC28
€94.01
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: BPFC-0040
SKU: hon-11317 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, ShopCarbon belly pan, KTM Duke 390
€244.43
Belly Pan, (Carbon), KTM390 Duke
This lightweight carbon belly pan, complete with mesh weighs less than the stock one and adds style to your ride.
Please note, this product fits the 390 only. For the 125 and 200 Duke see BPCL-7131
Update your bike with this great carbon product, direct replacement of the original part
Lower Cowling (GRP), NSR250, MC21/MC28 Stock Shape, Painted Rothmans
€595.33
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFL-9001Painted
SKU: hon-10973 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, NSR250 MC28, Shop, SilencersCarbon exhaust guard TYGA, Yamaha R25 – R3
€63.97
Exhaust Guard, TYGA Slip On, Yamaha R25/R3
Made from specially formulated high temperature resin, this exhaust guard adds the finishing touches to the TYGA Performance slip-on exhaust transformation. Fits in minutes and adds a factory GP touch to your bike.
Note, this product is only suitable when used with TYGA Performance R25 and R3 slip-on exhaust systems EXPS-0059 and EXPS-0060
Headlight, GP 250 Tyga
€70.35
A small Lightweight unit to discreetly mount on the fairing without spoiling the racing look
Compatible Parts:
Tyga Upper Cowling BPFU-0005 and BPFU-9026
TYGA no: BPLT-0004
SKU: suz-10009 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiTop Triple clamp CNC black, NC30
€218.46
CNC machined top triple clamp with detachable ignition switch/lock holder for your VFR400 NC30.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race us
TYGA no: TYLY-1044
SKU: hon-10112 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30