Rubber ram airbox, Honda RS250 NX5
€9.13
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0221B
SKU: hon-11382 Categories: ALL products, High performance, Honda, RS250R NF5 / NX5, Various partsSilencer stainless moto maggot 2" VFR750F gen 4, 94-97
€216.82
Silencer, Stainless Moto Maggot, 50.8 mm, VFR750F Gen 4, ’94-’97, Assy
Maggot silencer with 50.8 mm. inside diameter, Assy (with springs)
Please note this is a replacement for the EXPS-0119 VFR750F Gen.4 full system.
Please also note that decibel killer model EXDK-0007 is compatible but not included with this exhaust system. Please add EXDK-0007 to your cart if you wish it to be included in your order.
TYGA no: EXSL-0082
SKU: hon-11013 Categories: ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Exhaust set slip on, oval stainless silencer with carbon cap, Honda MSX125 GROM
€394.13
Set, Pipe, Slip On, MSX125 2013-14, Stainless Oval/Carbon End Cap
Made in stainless steel with spring mounted hairline finish stainless silencer, and precision made CNC machined end cap. This system significantly saves weight and gives the best bang for the buck! This systme is supplied with a decibel killer which significantly reduces noise without adversely affecting performance and with installed, this is currently our quietest exhaust system available for the MSX125. ideal for owners not wishing to disturb the neighbours! (May not comply with noise regulations for some states and territories)
This system is supplied with a stainless steel sleeve silencer EXSL-1142
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is from installing the TYGA Slip On set (EXPS-0040).
A useful gain all through the range. Note, this test was done without the decibel killer installed.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0051
SKU: MSX-10278 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, ShopCarbon passenger seat cover, Honda MSX125 GROM
€185.39
Passenger Seat Cover, (Carbon), MSX125 Grom.
This is the carbon version of our MSX125 passenger seat cowling. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPFX-7128 in a variety of colour options. See website for more details.
 
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
&nbsp;
&nbsp;
&nbsp;
&nbsp;
&nbsp;
TYGA no: BPCX-7128
SKU: MSX-10145 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopRear fender (under) RC211V, CBR250RR MC22
€244.39
Rear Fender/luggage compartment specially designed to be used with our RC211V style seat cowling for the MC22. This incorporates mounting points for registration/number plate and turn signals which can be cut down for race use.
Tyga Step Kit Replacement Toe Piece, Black, Assy.
€14.83
Replacement toe piece for your TYGA Step Kit.
Can also be used for fitting to almost any standard foot control lever to replace bent and damaged part by simply drilling a 6.3mm hole and countersinking on the back side of the lever.
Use Loctite to secure.
Comes with mounting bolt.
Kit, Seat Set, GRP, (Race), MC21, MC28, NSR250V
€432.66
Kit, Seat Set, GRP, (Race), MC21, MC28, NSR250V
Modelled closely from the seat cowling taken off an actual NSR500V HRC factory machine, this seat cowling kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but in proportion to the NSR250. This seat cowling set can be installed with both the MC28 and the MC21, (though to fit it on a MC21 you will need an MC28 fuel tank or TYGA Fuel tank BPCG-0001 or BPFG-0001). The set consists of the parts shown below and has special mounting hardware and seat pad provided.
We have designed the seat cowling so that for fuel tank removal, there is no need to remove the seat cowling, making for quick and easy jet changes and maintenance etc. Note, you do not need to change the subframe for either the MC21 or MC28 models to install this seat cowling which bolts to the stock subframe holes at the rear and special front lower subframe mounting positions with all hardware provided. The seat cowling has threaded holes in the underside to attach exhaust stays TYLY-0243L and TYLY-0243R for use with NSR250V exhaust system EXCS-0047
We recommend installing this seat cowling set with fairing set BPFS-0197 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0198
SKU: hon-11057 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Wheel Bearing Set, Front MC18/21/28
€18.58
Replacement front wheel bearing. OEM quality assured
2x Bearings included
TYGA no: TYPP-0009
SKU: hon-10833 Categories: ALL products, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various parts