Kitaco 181cc NEO 2v kit, Honda Grom 1st + 2nd gen.
€1,228.63
Kitaco 181cc NEO > 181cc big bore kit Kitaco for Honda MSX125 Grom 125.
High performance with high quality and durability.
This Kitaco kit with TYGA exhaust is good for 17 horsepower on the rear wheel.
Cylinder head shaped for better combustion and with high efficient port shape with bigger valve ( Ø30.0mm & Ø24.5mm valve, std are 25.5mm and 21mm).
Racing camshaft provided.
Hi compression piston 11.1:1.
Cylinder head shaped for better combustion and with high efficient port shape with bigger valve ( Ø30.0mm & Ø24.5mm valve, std are 25.5mm and 21mm).
Racing camshaft provided.
Hi compression piston 11.1:1.
Kit with:
-Complete cylinder head (with camshaft, spark plug,…)
-Cylinder with treatment Nicasil with high compression piston kit.
-Crankshaft with H-Rod (stock stroke).
-DID cam chain reinforced.
-Injector.
Attention: I-map and big throttle body kit are required.
TYGA no: 212-1432850 212-1432860
SKU: MSX-10368 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020 Tag: Honda MSX Kitaco NEO kit blackSet, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
€1,425.22
Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: EXPS-0133
SKU: hon-11044 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Racing step kit CNC silver, Honda NSR150
€330.17
TYGA Performance racing step kit assembly. Designed in-house by TYGA Performance using AutoCAD software, these CNC machine- made step kits are made from top quality, aircraft grade aluminium. Features levers moving on ball bearings to give precise and smooth movement, and comes complete, ready to bolt on with stainless steel fasteners. One of the many advantages over the standard footrest assembly is the ability to reverse the shift pattern without removal of the side stand, so giving the ‘racer’ set-up, on the street. Kit includes gear selector link rod.
Now includes rear brake light switch provision.
TYGA no: STAA-0001Â
SKU: hon-10281 Categories: ALL products, CNC parts, CNC parts, Honda, NSR150SP, ShopSilencer aluminium Classic 60mm, 2 stroke black endcap
€76.12
Silencer, Aluminium Classic, Two Stroke, Assy.
This aluminium two stroke silencer has been designed for those owners of two stroke motorcycles looking for a more old fashioned classic look. They have similar dimensions and perform the same as our other two stroke silencers and are available with two different colour options for the exhaust exit cap and nozzle to suit the customers’ requirements.
Stainless steel pressed mounting end cap with 3 M6 threaded holes for mounting to exhaust chamber flange
Stainless steel exit end cap and long nozzle in traditional design with choice of raw stainless or black powder-coated finish
Cartridge glass wool insulation for greater longevity
Lightweight: weighs just 0.7kg
Tough anodised body finish for enhanced looks and weather resistance
Silencer is supplied with paper gasket and stainless steel bolts and washers.
“Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.”
Compatible Parts:
All Tyga Performance Two Stroke chamber sets. Remember to order enough silencers for one complete system!
Other Alternative Products:
EXSL-0002 Shorty Aluminium Classic
EXSL-9005 Aluminium Premium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
EXSL-0067 Shorty Aluminium Premium
EXSL-0065 Shorty Carbon
EXSL-0066 Shorty Carbon/Kevlar
TYGA no: EXSL-0001b
SKU: alg-10091 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, ShopCarbon exhaust guard left, KTM RC390
€100.33
Exhaust Guard, Left, Carbon, KTM RC390 Serpent
This is not a simple cover, but a thick and very strong carbon part. Looks cool but also made to guard you, not getting burned by the silencers.
Carbon Exhaust guard for the TYGA serpent exhaust systems. This product is used to when the passenger footpeg assembly has been removed and a TYGA Performance underseat exhaust installed.
Compatible with the following TYGA exhaust systems:
EXPS-0061
EXPS-0062
TYGA no: BPCC-0021L
SKU: ktm-10061 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Exhausts, KTM, RC 390, ShopClamp, Silencer, Single, 90 mm., Assy.
€25.21
Stainless steel clamp. 90 mm. internal diameter with rubber protection for a firm, but friendly grip on your silencer. Includes mounting bolt, nut and washer.
Compatible with Silencers EXSL-0024 and EXSL-0025.
Fairing set street, Suzuki RGV 250
€847.04
Kit, GP-T Fairing Set, Street, VJ22 RGV250
This modern fairing, designed in-house by TYGA Performance, in the popular GP-T style is now available for the Suzuki RGV250 VJ22. As well as bringing the RGV250 VJ22 up to date, it also offers a useful weight saving and easy fitment and removal. The kit is supplied with all mounting hardware. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
* A clear screen is provided unless you specify tinted.
TYGA no: BPFS-0187
SKU: suz-10118 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, SuzukiCarbon tankcover front, 696/795/796/1100
€130.44
Tank Cover, Front, (Carbon), Ducati Monster