Fairing set street RC211V TE3, NC35 kit
€910.45
The kit faithfully reproduces many of the 2006 model RC211V fairing features including front air ducts, side air duct design and full console joining up to the tank. Differs in headlight fitment from BPFS-0013.
This set of bodywork requires extensive modification of the NC35 including a tank cover, a meter stay for quick fastening of fairing upper and for the instruments to gain clearance with headlights and all the fitting hardware. It also includes a steering stopper to limit steering movement.
Comprises the parts shown below which are also available separately:
*A clear screen is provided unless you specify tinted in the comment box at check out
TYGA no: BPFS-0033
SKU: hon-10129 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopCarbon side trim cover (pair), Honda MSX125SF GROM
€75.79
Side Trim Covers, Pair (Carbon) MSX125SF
Carbon side trim to decorate your MSX125 Grom. Precision molded, these fit over the stock plastic stock items and transforms the appearance of your bike. Install with double sided tape provided or with silicone sealant for a really permanent installation.
TYGA no: BPCC-7028
SKU: MSX-10394 Categories: ALL products, Bodywork and carbon, Carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020Seat set race carbon GP-T, Honda NSR250 MC28
€1,253.65
Kit, Seat Set, Carbon (Race), MC28 GP-T
This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC28 but also an MC21 fitted with an MC28 fuel tank. The kit comprises parts shown below which are also available separately.
Note there are 4 MC28 GT-T seat cowling kits to choose from:
BPFS-0133 Street GRP
BPFS-0134 Race GRP
BPFS-0135 Street Carbon
BPFS-0136 Race Carbon
Note, some pictures below show the street version with taillight and turn signals which are not included in this kit.
TYGA no: BPFS-0136
SKU: hon-10451 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC28, ShopTorque arm link Titanium, Honda NSR250 MC21
€326.36
Torque Arm Link, MC21
The NSR250 engine is rubber mounted to the frame to reduce vibration. The torque arm link that is fitted between the swing arm pivot and the engine stops the engine from lurching backwards and forwards during acceleration, deceleration and gear changes, while still absorbing the engine vibrations.
Over time, the torque arm link bushes become worn and loose. This then allows small movements especially when power is applied. It is particularly noticeable when changing from one low gear to another and makes the gear change feel very clunky.
The initial reaction is to check the gearbox, but before going there, it is a good idea to check the torque arm and if it is worn, to replace it with this high quality titanium upgrade. The improvement can be dramatic.
Replaces the following Honda OEM part numbers:
- 50184-KV3-830
- 50186-KV3-830
- 50188-KV3-830
- 50185-KV3-830 (assy of the above 3 part numbers)
This part, which is very hard to find as a genuine product, is made of 64 titanium by T2Racing, and all parts are made of full titanium.
*One set consists of 3 parts for each part. We do not sell individual items.
*Two collars are already press-fitted into the link body.
TYGA no: TPER-5005
SKU: hon-11377 Categories: ALL products, High performance, High performance, Honda, NSR250, NSR250 MC21, Shop, Various partsSeat cowling (grp) stock shape street single, Honda NSR250 MC28
€290.93
Seat Cowling (GRP), NSR250 MC28, Stock Shape, Street Assy.
This seat cowling is a direct replacement for the stock plastic seat cowling and is exactly the same shape. Unlike the plastic part, it doesn’t have joins between the sides and the tail piece and it can even be ordered without the passenger seat pad strap holes to give a factory race look. There is no compromise in practicality though, and the panel features the luggage door and all mounting tabs for the taillight, duct shroud and luggage bracket. It can be used with stock Honda parts or TYGA parts such as BPCX-0001 and BPCC-0013.
Note: BPFT-0007B luggage door is included and can also be ordered seperately.
TYGA no: BPFT-0007Â
SKU: hon-10528 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, NSR250 MC28, ShopTYGA stepkit replacement right side hanger mount (adj), Ninja 400
€80.30
TYGA Step kit Replacement Right Side Hanger Mount (Adj) Ninja 400, Assy
Carb Service Kit B, 23 pieces, Honda CBR250R MC14, MC17 & MC19
€43.36
Carb Service Kit B, 23 pieces, Honda CBR250R MC14, MC17 & MC19
LiteTek Carburettor Seal Kit to suit
Honda CBR250R MC14, MC17 & MC19
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x OR-011 Float Breather O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-KT7-003)
6x OR-016 Fuel T-Pipe O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-KT7-003)
6x WS-018 Vacuum Breather O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-KT7-003)
4x CS-004 Choke Plunger Cap, Material: HNBR, (Part of Honda Assembly Part No. 16046-KT7-003 or 16046-KT8-003)
3x SC-008 Throttle Synch Screws, Material: Stainless Steel
TYGA no: CKB-Honda-MC19
SKU: alg-10362 Categories: ALL products, Carburettor Service Kits,, CBR250R MC19, HondaCarbon tank shields, Yamaha R6 2008-12
€263.23
This product replaces the cheap looking plastic panels which fit between the frame and the tank on the R6. This product comprises one left and one right panel which can be fitted in minutes. Front part held in place by Velcro provided.
TYGA no: BPCC-7109
SKU: yam-10022 Categories: ALL products, Carbon, Shop, Yamaha, YZF-600 R6 2008- 12