Silencer, Stainless, Round, Four Stroke, 44.5mm., No Fittings
€216.73
Silencer, Stainless, Round, Four Stroke, 44.5mm., No Fittings
The Dimensions of this silencer are as follows:
I.D. 44.5mm (slip-on section) O.D. 4 inch. (diameter of stainless tube) L. 380mm Suitable for Ninja 250/300 and medium capacity four stroke motorcycles.
Tyga Step Kit Replacement M6 RH M. rod end, NSR150/250
€11.47
Replacement left hanger for your TYGA Step Kit. Complete with mounting bolts and bushes.
TYGA no: Stre-0106
SKU: hon-11527 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC21, NSR250 MC28, ShopFairing set street T13, Honda VFR400 NC30
€966.12
Newly introduced for 2013, the T13 body kit has been designed to be both contemporary and stylish and provide an updated alternative to our popular RC211V kits. The GRP panels this kit uses are made from using high quality epoxy resin and is both light and flexible. We also make the same kit but extensive use of carbon fiber, see BPFS-0120.
This set of bodywork requires modification of the NC35 including a tank cover, a meter stay and all the other components listed below which are also available separately.
*A clear screen is provided unless you specify tinted in the comment box at check out
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0119
SKU: hon-10354 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Seat set race, aluminium subframe, Suzuki RGV 250
€698.64
One of our most popular TYGA bodykits from last years.
Designed for the Suzuki RGV250, but used on many bikes all over the world.
This set of bodywork comprises the parts shown in the picture which are also available separately.
It is supplied with all additional fasteners required to mount it to a stock VJ22.
If you have left and right exiting chambers (side by side) you will need to add 1 X TYLY-0029 to your order (Only one supplied in kit for twin right exiting chambers)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFS-1037
SKU: suz-10212 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiSub frame GP-T, Honda VFR400/RVF400
€184.32
This strong but lightweight subframe replaces the stock item when used as part of the NC30/35 GP-T style seat cowl kit. Essential for mounting the seat cowl, this component is supplied with all brackets and mounting points to substitute this for the OEM Honda item.
Compatible Parts:
Only to be used with NC30/35 GP-T kit parts, battery box TYLY-0130, seat cowling BPFT-9034 and BPCT-9034, undertray BPFX-9034 and BPCX-9034etc.
TYGA no: TYLY-0133
SKU: hon-10594 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, RVF400RR NC35, VFR400RR NC30Carbon upper cowling with airducts, stock shape, NXA RS250R (2001- ’08)
€850.63
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Carbon rear hugger large , Honda CBR1000 2008 – 11
€156.29
This lightweight and attractive rear hugger replaces the stock one and gives much better weather protection and keeps road dirt away from the rear suspension.
Beautiful, perfect fitment and give your bike that HRC look.
Racing stepkit silver/GOLD adjustable, Honda MSX125 GROM
€477.27 €395.87
Racing Rear Set Kit, Adjustable, silver with GOLD Slot Cover, MSX125 Grom
With all major components desgined specifically for the MSX125 Grom in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items. Be sure to order the correct colour combination. Some photos below are for reference and show different colours to this product.
Note, no real brake light provision. If required, we recommend installation of inline pressure switch.
<a href= {{media url= wysiwyg/05-fitting-msx-step-kit-online-6e1bce74.pdf }} target= _self >Click here for fitting instructions</a>
You can only use these steps on the MSX125SF if you have a TYGA high level exhaust
TYGA no: STAA-0019GOLD
SKU: MSX-10239 Categories: ALL products, CNC parts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, Shop, Steps, Steps