Lower cowling stock shape right, CBR250RR MC22
€108.39
Exact copy of right side of stock MC22 shape lower to be used either with stock shape or Tyga RC211V style bodywork.
Carb Service Kit A, 39 pieces, Honda CBR400RR NC23
€72.27
Carb Service Kit A, 39 pieces, Honda CBR400RR NC23
LiteTek Carburettor Seal Kit to suit
Honda CBR400RR NC23(G-H-J-K)
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-006 Float Bowl Ring, Material: Flourosilicone (Part of Honda Assembly Part No. 16010-MN4-003 superseded by 16010-MN4-305)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of Honda Assembly Part No. 16010-MN4-003 superseded by 16010-MN4-305)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda Assembly Part No. 16010-MN4-003 superseded by 16010-MN4-305)
6x OR-018 Vacuum Breather O-Ring, Material Viton 70A (The parts book lists the part number for the vacuum o-rings as being part of the kit 16040-MM5-601. However, that kit only contains the o-rings for the fuel tubes and float bowl breather tee pieces. Therefore, we have added these o-rings to the kit)
4x OR-011 Float Breather O Ring, Material: Viton 70A (Part of Honda Assembly Part No. 16040-MN4-003 superseded by 16040-MM5-601)
6x OR-016 Fuel O-Ring, Material: Viton 70A (Part of Honda Assembly Part No. 16040-MN4-003 superseded by 16040-MM5-60)
4x CS004 Choke Plunger Cap, Material: HNBR (Part of Honda Assembly Part No. 16046-KT8-003 or 16046-KY2-711)
3x SC-008 Throttle Synch Screws, Material: Stainless Steel
TYGA no: CKA-Honda-NC23
SKU: alg-10357 Categories: ALL products, Carburettor Service Kits,, CBR400RR NC23, HondaSeat cowling GRP single “Street”, RC36-2 RC30 style
€384.00
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFT-7049
SKU: hon-11475 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistSeat set with carbon race, Honda NSR250 MC21
€606.64
This set of bodywork is designed to replace the stock seat cowling with the race version of our GP Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21 but also an MC28 fitted with an MC21 fuel tank. The kit comprises of the parts below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0004
SKU: hon-10224 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, ShopSet exhaust Gp style stainless steel, Honda NSR250 MC28
€769.95
Set exhausts side by side stainless steel, Honda NSR250 MC28
The ultimate exhaust set for your NSR250, beauty and performance!
Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
For more information on how to get the best power out of this system, combine it with other parts of our MC28 Power Up Kit (see under ‘technicical help’) to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock footpeg hangers as well as work with our Tyga Performance step kit STAA-0002. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)
NEW! Our latest design, is provided with silencer clamping hardware which mounts directly to the stock right side MC28 silencer stay for a more secure and firm installation.
By selecting stainless steel for longevity and beauty, TYGA systems offer ubeatable value.
Please note this product fits MC28 only. For MC21, please select EXCS-0006A
This product, EXCS-0006B, has both chambers exiting on the right.
Parts included with this product:
1 x left side chamber, GP (right exiting) stainless steel
1 x right side chamber, (right exiting) stainless steel
1 x silencer double clamp and mounting bolt, washers and nut
2 x manifolds
2 x mounting flanges
4 x mounting springs
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set
TYGA no: EXCS-0006b
SKU: hon-10605 Categories: 2 stroke exhaust sets, ALL products, By model, Exhausts, Exhausts, Honda, NSR250 MC28, ShopMirror blanking plate silver, Honda VTR1000 SP2
€39.50
Handy mirror blanking plates for your VTR1000 SP2.
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
Mounting pitch is 40mm, so will fit many models.
2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can use your standard mirror mounting nuts to secure.
Seat set T9, CBR400RR
€207.80
This product consists of the seat cowling only. For a complete kit including undertray/rear fender tail light etc. select BPFS-0074
Carbon front fender stock shape, Honda Monkey 125 2018-
€153.21
Front Fender, Carbon, stock shape, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCF-7042
SKU: MSX-10426 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, Shop