Brake Lever, MC28
€118.57
Brake Lever, MC28
TYGA no: 46500-KV3-830
SKU: hon-11145 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Clutch Plate A, MC21SP
€20.99
Clutch Plate A, MC21SP
TYGA no: 22201-KV3-840
SKU: hon-11075 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC21Triple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, CBR600RR Forks to fit MC21/MC28
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3306
SKU: hon-11246 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28, Stock list, all modelsSection Final shorty stainless, Honda Monkey 125 2018-
€109.84
Set, Full System, Monkey 125 (No Silencer)
Can be used with TYGA Moto Maggot Silencer EXSL-8213(p)
See also EXPS-0104 For complete set
Carbon Rear hugger, Aprilia RS125 (1996-2008)
€156.69
Fits all model Aprilia RS125. Weight approx. 0.125 kg.
Update your bike with this great carbon product, direct replacement of the original part
TYGA no: BPCH-7007
SKU: apr-10012 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS125, ShopExhaustset stainless steel carbon silencer round, Kawasaki ZXR250
€639.76
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round carbon silencer EXSL-0032
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.P Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifold<iframe width="560" height="315" src="https://www.youtube.com/embed/z5hGKrpQ56c" frameborder="0" allowfullscreen></iframe>
TYGA no: EXPS-0015Â
SKU: kaw-10017 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopKit complete body kit “street” with front fender GRP RC30 style, Honda VFR400 NC30
€1,073.55
This is the all GRP seat cowling used in the NC30 RC211V style seat cowling kits, BPFS-0028 and BPFS-0034.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPFS-0228
SKU: hon-11429 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Upper Cowling Race (GRP), NC30/NC35, GP-T, Assy.
€317.01
Upper Cowling, Race (GRP), NC30/NC35, GP-T, Assy.
Stylish replacement fairing designed in-house by TYGA Performance to give the NC30 and NC35 a contemporary look. Together with lower cowling BPFL-9034 for NC30 and BPFL-9134 for NC35 and other mounting hardware it comprises race sets BPFS-0163 for the NC30 and BPFS-0164 for the NC35.
This cowling is supplied with a plastic bung to mount to the meter stay.
Compatible parts:
BPFL-9034 and BPFL-9134 Lower Cowling
TYLY-0138 (NC30) and TYLY-0139 (NC35) Upper Stay
TYLY-0187 (NC30) and TYLY-0188 (NC35) Front Stay
TYLY-0189 (NC30) and TYLY-0190 (NC35) Side Stays
SCRE-0161 Screen, Clear GP-T, or SCRE-0162 Screen, Tint GP-T
TYGA no: BPFU-9134
SKU: hon-10725 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, RVF400RR NC35