Lower Cowling (GRP), NSR250, MC21/MC28 Stock Shape, Painted Rothmans
€595.33
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFL-9001Painted
SKU: hon-10973 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, NSR250 MC28, Shop, SilencersCarbon under tank covers, Honda MSX125SF
€94.45
Carbon under tank covers, Honda MSX125SF
Fits over nasty plastic stock items and transforms the appearance of your bike.
Install with double sided tape provided or with silicone sealant for a really permanent installation
TYGA no: BPCC-7428
SKU: msx-10389 Categories: ALL products, Bodywork and carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020, ShopExhaustset race Stainless steel no Silencer, NC30 NC35
€883.63
Great looks and extra power!!
Exhaustset race Stainless steel no Silencer, NC30 NC35
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inch internal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
EXSL-0012 round carbon, EXSL-0013 Moto Maggot, EXSL0017 Oval Stainless, EXSL-0020 Oval Carbon, Short, and EXSL-0028 Oval Carbon Long
This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0002
SKU: hon-10098 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Temperature Sensor, MC21
€62.70
Temperature Sensor, MC21
TYGA no: 37750-PC1-004
SKU: hon-11079 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC21Key holder CNC black, Aprilia RS250
€78.51
gnition Switch Holder, CNC Black, Aprilia RS250
This is a removable ignition switch holder for our Aprilia RS250 top triple clamp. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-1053.
TYGA no: TYLY-1153
SKU: apr-10013 Categories: ALL products, Aprilia, CNC parts, CNC parts, RS250, ShopLower cowling, Aprilia RS250 Tyga, assy
€234.42
This lower cowling is suitable for our Aprilia RS-250 kits, BPFS-0100 and BPFS-0101.
This product is compatible with upper cowling BPFU-9030 and BPFU-9130. Will not fit stock Aprilia upper cowling
TYGA no: BPFL-9030Â
SKU: apr-10044 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, ShopSection, Header, Left, Stainless, Ninja 250R
€79.66
Header, Reft. Used on EXPS-0014, EXPS-0015, EXPS-0016, EXPS-0017 and EXPS-0018.
TYGA no: EXPT-0012
SKU: kaw-10104 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopCarbon dash cover, Yamaha V-max
€134.12
Weight approx. 0.09 kg. This is a simple replacement part for the stock item. Fits in minutes.