Carbon ignition cover, Honda VFR400/RFV400
€119.92
This engine protective cover is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
Approx weight 0.09 kg
TYGA no: BPCC-9004
SKU: hon-10486 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30Exhaustset race Stainless steel no Silencer, NC30 NC35
€883.63
Great looks and extra power!!
Exhaustset race Stainless steel no Silencer, NC30 NC35
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inch internal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
EXSL-0012 round carbon, EXSL-0013 Moto Maggot, EXSL0017 Oval Stainless, EXSL-0020 Oval Carbon, Short, and EXSL-0028 Oval Carbon Long
This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0002
SKU: hon-10098 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Set pipe full system with maggot silencer, Honda Monkey 125 2018-
€442.31
Set, Pipe, Full Race System, Monkey 125, Moto Maggot This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted Moto Maggot silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).</br>
Note that this exhaust system is supplied with mounting hardware so the original Honda exhaust guard can be installed with the TYGA Maggot system. However, this guard is not necessary and the exhaust system can be installed without the guard, as the pipework is not likely to contact the rider in normal operation.
All fitting hardware included.
</br>
<strong>Instructions</strong>
<a href= /media/wysiwyg/MSX-10449-fitman-exms0017.pdf target= blank >Download Instructions here</a>
</br>
<strong>Performance and Dynograph</strong>
The blue trace shows the 100% standard Honda Monkey, compared to the red trace, which is after installing the TYGA Full System set, Monkey 125, Moto Maggot. A useful gain all through the range, increasing as the revs rise up to maximum.
</br>
<strong>Please also see:</strong></br>
<a href= /index.php/set-pipe-full-system-with-carbon-oval-silencer-honda-monkey-125-2018.html >MSX-10451 Carbon Oval High level System, Monkey 125</a>
<a href= https://www.tygaeurope.com/index.php/set-pipe-full-system-no-silencer-honda-monkey-125-2098.html >MSX-10450 Stainless Oval High level System, Monkey 125</a>
Carbon front fender, Yamaha V-max
€178.41
Carbon front fender, direct replacement from stock Yamaha part.
Weight 0.185 kg
Let your bike stand our from the crowd.
Sub-frame (TYGA), Suzuki RGV250 VJ22
€143.58
This subframe is a replacement for the stock Suzuki item and to be used in our TYGA seat cowling kits BPFS-0036, BPFS-0037, BPFS-0038 etc. and bolts up to the VJ22 frame without need for modifying any components. It will not fit the stock Suzuki seat cowling.
The subframe is supplied with all the fasteners needed to mount the various components that are housed under the seat cowling and incorporates a battery tray. This product is made in steel but is much smaller than the stock one and weighs much less without compromising strength.
Not to be used on a motorcycle carrying a passenger and rider.
This subframe is only compatible with the TYGA rear seat, the original seat cowling won’t fit.
TYGA no: TYLY-0028Â
SKU: suz-10089 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, RGV250 VJ22, Shop, Suzuki, Universal partsShroud right black, Honda MSX125 GROM
€32.45
Shroud right black, Honda MSX125 GROM (msx-10016)
OEM Honda part
TYGA no: 83480-K26-900ZD
SKU: MSX-10016 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopBelly pan (GRP) Yellow, Honda MSX125 GROM
€225.09 €158.00
Belly Pan, (GRP), MSX125, painted Y-217 Queen Bee Yellow to match your bike. Bling up your grom with this cool component.
Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
High quality mounting hardware provided and easy to install.
We also offer the same product with carbon, see BPCL-7228 shown on the bike in the photos.
Note: this product is painted to match Y-217 Queen Bee Yellow. Note we also have a similar product BPFL-7128 YM, (Y-216 Marigold Yellow) which matches the colour of the MSX125 Grom sold in some markets. Be sure to confirm the colour of your bike before ordering.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href=”{{media url=”wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf”}}” target=”_self”>Click here for PDF</a></p>
TYGA no: Â BPFL-7128 Y
SKU: MSX-10190 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopLower cowling RCV211, NC30
€174.41
This lower cowling is part of a set of bodywork BPFS-0011 and BPFS-0012 comprising the following parts which are also available separately:
BPFU-9017/19 NC35 Upper Cowling RC211V style (street/race)
BPFL-9118 NC35 Lower Cowling RC211V
BPLT-0011 Tyga Eyes II headlight/turn signal assembly
SCRE-0081/82 2005 RC211V style, Screen clear/tint
TYLY-0021 NC30 RC211V Style Upper stay
TYGA no: BPFL-9017
SKU: hon-10086 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30